|
This item has been sold |
| 136 | |
| times |
The Hydra 2 Revised is the ultimate automatic SCART switcher that lets you connect up to 8 retro consoles to your TV without ever unplugging cables again.
Stop wrestling with SCART cables behind your TV every time you want to play a different console
The Hydra 2 Revised by Lotharek is the definitive SCART switching solution for retro gaming enthusiasts with multiple consoles. This intelligent automatic switcher connects up to 8 SCART devices to your TV or monitor, instantly detecting when you power on a console and switching to it automatically. Whether you're gaming on your SNES, Mega Drive, PlayStation, Saturn, Dreamcast, or any other SCART-compatible system, the Hydra 2 handles everything with full RGB support for crystal-clear picture quality.
What sets the Hydra 2 apart is its galvanic isolation technology. Each of the 8 SCART inputs is electrically isolated from the others, which means a noisy power supply or ground loop from one console won't interfere with your other systems. The stylish "Knight Rider" LED array shows you exactly which input is currently active, and if you need even more connections, you can expand to 16 inputs using the optional Hydra Heads accessory.
Dual Outputs and Versatile Audio Options
The revised version gives you two SCART outputs instead of one, so you can connect two displays simultaneously—perfect if you're using an upscaler alongside your CRT, or feeding multiple rooms. You also get stereo RCA audio outputs and an amplified headphone jack, both with adjustable volume that you can control right from your remote. TTL/75Ohm sync switches on each output ensure compatibility with everything from vintage CRT monitors to modern upscalers like the OSSC or RetroTINK.
Works With Any Remote Control
The Hydra 2 Revised features a built-in IR learning mode that works with virtually any infrared remote you already own. Just hold the middle button during power-up and the LED indicators guide you through programming. Once configured, you can switch between automatic scanning mode (where the Hydra finds active sources for you) and manual mode for direct input selection. There's even a HD/Low Pass filter toggle for fine-tuning signal quality, and the AVR microcontroller supports firmware updates for future improvements.
Revised Edition Enhancements
This revised model addresses all the signal detection quirks from earlier versions with improved hysteresis circuitry, ensuring rock-solid compatibility with all your cables and consoles. You get three independent audio buffers delivering clean sound to all outputs simultaneously. SCART input 2 now supports Sync on Green mode via the SW7 switch—essential for certain RGB devices and computer systems. Input 8 features a dedicated RGB Only/Auto switch, perfect for Amstrad computers, ZX Spectrum +2/+3, and other systems with unique sync requirements. Additional protection circuitry at every SCART input safeguards the sensitive switching chips from damage.
Power comes from any standard Micro USB phone charger (5V/1A, not included) or via the 2.1/5.1mm barrel jack accepting 7.5-9V AC/DC. Setup is straightforward—just connect your consoles and TV, power everything up, and the Hydra does the rest. One important note: always power off the Hydra before plugging or unplugging SCART cables to prevent damage to the unit.
The Professional Choice for Serious Collectors
If you're collecting for Nintendo, Sega, Sony, Atari, Commodore, NEC, or any other classic system with SCART output, the Hydra 2 Revised transforms your setup from a cable nightmare into an elegant, professional gaming station. No more crawling behind your CRT every time you want to switch systems. No more signal degradation from cheap passive switchers. This is the solution that serious retro gamers rely on when they demand both convenience and uncompromising video quality from their vintage hardware.
Your cart is empty
