New
GPD WIN Max 3 - Replacement Battery 97Wh (Preorder)
Keep a spare battery ready for your GPD WIN Max 3 and spend more time away from the power outlet.
- Original removable battery module for WIN Max 3
- Magnetic attachment, no opening the computer
- Useful as a replacement or spare
- One battery module is already included with the WIN Max 3
A spare battery for your GPD WIN Max 3
The GPD WIN Max 3 uses a removable, magnetically attached external battery. This genuine 97.53Wh replacement battery module gives you a spare for longer trips or a replacement for a battery that has worn down over time.
Easy to replace
No need to open the computer or undo screws. The module connects through the WIN Max 3's dedicated magnetic interface. Shut the computer down before swapping modules and pull the module away carefully without twisting the connector. This is not a generic USB power bank.
Capacity and practical use
GPD specifies 97.53Wh capacity and an approximate weight of 405g. Actual runtime depends on display brightness, power settings, games and workloads. A spare battery increases the amount of energy you can bring along, but it does not guarantee a particular number of gaming hours.
The WIN Max 3 can also run from its DC adapter with no battery attached. For extended high-performance desk use, the separately available external fan module can be fitted in place of the battery.
Please note: One battery module is already included when purchasing the GPD WIN Max 3. This listing is for one additional battery module only, without the computer, cooling module or charger. It is designed for the WIN Max 3, not WIN Max 2 or WIN 5.
WM3-BATT
- Brand compatibility
- GPD
- Battery category
- Secondary, 251-500g, Li-Ion
- Battery weight (g)
- 405
- Battery capacity (Wh)
- 97.53
Manufacturer
GPD Corporation
+86 0755 8657 2275
1006, Block 4D, Software Industry Base
High-Tech Industrial Park, Shenzhen
518000 Shenzhen
China
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
You might also like
chat
Comments (0)
GPD Duo Replacement Battery
Last items in stock
Original replacement battery (model 6548A0) for the GPD Duo – sourced directly from the OEM manufacturer, not a cheap knockoff. Important: The 6548A0 designation also exists for the GPD Win 5, but the two batteries are physically incompatible – only install this one in a GPD Duo.Fits the GPD Duo perfectly and communicates correctly with the device's charge controller.Supports fast charging at up to 100 W (PD 3.0) – just like the original factory battery.At 80 Wh capacity, you'll get your GPD Duo back to full endurance.Warning: Not compatible with the GPD Win 5, despite sharing the same 6548A0 model number.
€89.00
GPD Win Mini (2023/2024 version) Replacement Battery
In Stock
Original replacement battery (model 4139D5) for the GPD Win Mini – straight from the OEM manufacturer, perfectly fitting and reliable. The right choice when your battery no longer holds a full charge.
Capacity: 3,810 mAh / 44.24 Wh
Voltage: 11.61 V (3 cells, Li-Polymer)
Compatible with: GPD Win Mini 2023 & 2024
Part number: 4139D5
Original GPD manufacturer
Capacity: 3,810 mAh / 44.24 Wh
Voltage: 11.61 V (3 cells, Li-Polymer)
Compatible with: GPD Win Mini 2023 & 2024
Part number: 4139D5
Original GPD manufacturer
€49.00
GPD Win Max 2 - Replacement keyboard (QWERTY)
In Stock
ONLY the international keyboard for the GPD Win Max 2
€25.00
GPD Win Max 2 - German replacement keyboard (QWERTZ)
In Stock
ONLY the German keyboard for the GPD Win Max 2
€25.00
GPD XD Plus Replacement LCD
Last items in stock
Give your GPD XD Plus a brand new screen — this replacement LCD with integrated touchscreen gets your handheld back in action fast!Direct replacement LCD for the GPD XD Plus (XD+)Includes the touchscreen — no separate touch panel neededSimply open the top lid, swap out the old display, and you're doneDoes NOT include the LCD cable — grab one separately if yours is damagedPerfect for DIY repairs and getting your handheld back to full gloryImportant: The LCD cannot be returned once it has been assembled
€40.00
Replacement rubber cap for mouse nub (GPD Pocket)
In Stock
Keep your GPD Pocket mouse nub fully functional with this genuine red replacement rubber cap!Official GPD spare part — a perfect fit for the GPD Pocket mouse nubRestores full control and feel to your pointer nub in secondsBright red color matches the original GPD Pocket designIdeal if your original cap is lost, worn out, or damagedEasy DIY replacement — no tools or technical skills requiredA must-have spare part for any GPD Pocket owner
€3.00
GPD Win Carbon Pad DPad and Buttons Set
In Stock
Bring your GPD Win back to life with this original carbon pad replacement set for the DPad and buttons.Includes conductive carbon pads for both the DPad and action buttons of the GPD WinOriginal GPD replacement parts for reliable performance and a perfect fitIdeal fix when buttons feel unresponsive, mushy, or stop registering inputsCompatible with the GPD Win handheld consolePerfect for DIY repairs and handheld modding enthusiastsNote: Opening the device is required — proceed carefully or consult a repair guide
€6.00
GPD Duo Replacement Battery
Last items in stock
Original replacement battery (model 6548A0) for the GPD Duo – sourced directly from the OEM manufacturer, not a cheap knockoff. Important: The 6548A0 designation also exists for the GPD Win 5, but the two batteries are physically incompatible – only install this one in a GPD Duo.Fits the GPD Duo perfectly and communicates correctly with the device's charge controller.Supports fast charging at up to 100 W (PD 3.0) – just like the original factory battery.At 80 Wh capacity, you'll get your GPD Duo back to full endurance.Warning: Not compatible with the GPD Win 5, despite sharing the same 6548A0 model number.
€89.00
GPD Win Mini (2023/2024 version) Replacement Battery
In Stock
Original replacement battery (model 4139D5) for the GPD Win Mini – straight from the OEM manufacturer, perfectly fitting and reliable. The right choice when your battery no longer holds a full charge.
Capacity: 3,810 mAh / 44.24 Wh
Voltage: 11.61 V (3 cells, Li-Polymer)
Compatible with: GPD Win Mini 2023 & 2024
Part number: 4139D5
Original GPD manufacturer
Capacity: 3,810 mAh / 44.24 Wh
Voltage: 11.61 V (3 cells, Li-Polymer)
Compatible with: GPD Win Mini 2023 & 2024
Part number: 4139D5
Original GPD manufacturer
€49.00
GPD Win 5 - Official Carry Case
In Stock
The GPD WIN 5 Case is the officially tailored EVA hard shell carry case for the GPD WIN 5 – custom-fitted, rugged, and built for everyday transport of your gaming handheld.Engineered exclusively for the GPD WIN 5 – sits snug, stays put.Rugged EVA hard shell protects against bumps, drops, and scratches.Soft, scratch-free padded lining keeps the 120Hz display flawless.Dedicated compartment for the 80Wh battery pack plus room for cables and more.Hand strap and durable zipper make it ready for the road.
€29.00
GPD Pocket 3 / 4 - Official Carry Case
In Stock
The official GPD Pocket 4 Protective Case in premium faux leather keeps your mini laptop safe and within reach – whether in a backpack, briefcase, or on the road.
Official GPD accessory, tailored for GPD Pocket 4 (also compatible with Pocket 3)
Faux leather exterior with soft inner lining
Magnetic closure for quick and secure access
Stylus pocket included (note: GPD stylus is too long to close case fully)
Slim, lightweight design – no unnecessary bulk
Official GPD accessory, tailored for GPD Pocket 4 (also compatible with Pocket 3)
Faux leather exterior with soft inner lining
Magnetic closure for quick and secure access
Stylus pocket included (note: GPD stylus is too long to close case fully)
Slim, lightweight design – no unnecessary bulk
€19.00
GPD MicroPC 2 - Official Carry Case
In Stock
The official carrying case for the GPD Micro PC 2 – hard EVA shell, perfect fit, and a distinctive Micro PC 2 imprint.
Hard EVA shell: rigid, shock-absorbing protection
Precision fit for the GPD Micro PC 2 (device only, no charger included)
Official Micro PC 2 imprint on the case
Soft interior lining prevents scratches
All-around zipper for secure closure
Hard EVA shell: rigid, shock-absorbing protection
Precision fit for the GPD Micro PC 2 (device only, no charger included)
Official Micro PC 2 imprint on the case
Soft interior lining prevents scratches
All-around zipper for secure closure
€19.00
GPD Win 5 Dock
Last items in stock
With the docking station, you can transform your GPD Win 5 into a desktop PC. It offers USB ports, HDMI, a network port and can charge your battery.
€99.00
GPD Pocket 4 RS-232 Module
In Stock
The RS-232 module adds a physical native serial port with proper level conversion to the GPD Pocket 4.Native RS-232 interface with level shifterNot a USB-to-serial adapterFor legacy industrial, service and control hardwareDirect expansion module for the GPD Pocket 4
€17.00
GPD Pocket 4 KVM (Capture)-Module
Last items in stock
The KVM module transforms your GPD Pocket 4 into an administration tool: It can be used as an external keyboard, mouse and monitor.
€55.00
GPD Win Mini Carry Case (pre-2025er edition)
In Stock
Protect your GPD Win Mini (pre-2025 models) with this official carry case designed for perfect fit and reliable protection on every adventure.Official GPD accessory engineered specifically for Win Mini units made through 2024Durable construction shields against bumps, drops, and scratches during travelCompact design fits easily in backpacks, bags, or large pocketsSnug fit keeps your handheld secure and protected wherever you goPerfect companion for retro gaming sessions away from homeNote: Designed for pre-2025 models; newer 2025 versions have different dimensions
€19.00
GPD Win Max 2 - Replacement keyboard (QWERTY)
In Stock
ONLY the international keyboard for the GPD Win Max 2
€25.00
GPD Win Max 2 - German replacement keyboard (QWERTZ)
In Stock
ONLY the German keyboard for the GPD Win Max 2
€25.00
GPD Win 3 Grips
Last items in stock
Keep your GPD Win 3 safe and comfortable with these perfectly fitted protective grips.
Custom-molded to fit the GPD Win 3 precisely
Non-slip surface provides secure grip during gameplay
Protects against scratches, bumps and daily wear
Enhances ergonomics for marathon gaming sessions
Full access to all ports, buttons and controls
Quick installation with residue-free removal
Custom-molded to fit the GPD Win 3 precisely
Non-slip surface provides secure grip during gameplay
Protects against scratches, bumps and daily wear
Enhances ergonomics for marathon gaming sessions
Full access to all ports, buttons and controls
Quick installation with residue-free removal
€25.00