A drop-in USB-C power supply replacement for your GameCube. Extremely reliable, supports all GameCube revisions and upgrades like PicoBoot or PixelFX.
Most old power supplies (not limited to the GameCube one) will eventually get weaker overtime - and stop working reliably at some time.
Also, they're a lot less efficient as more modern ones. That's the reason we offer modern replacement power supplies.
The GameCube replacement power supply by robot_retro is (at least in our opinion) one of the best modern ones available for the Gamecube.
It works on ALL GameCube models, supports all accessories and is very reliable and stable.
It's fully plug and play, no soldering or anything needed. Just remove your old one and put in the new one - that's it!
In case you order the power supply together with a RetroGEM installation or a capacitor replacement, we'll install it in your console for free.
Here's a summary of the most-important details:
Drop-in USB-C PSU Replacement
- No soldering or wiring required—simply install and play. All you need is a USB-PD power supply with at least 30W.
Universal Compatibility
- Works with all Gamecube models (PAL, NTSC, Japanese), Picoboot, RetroGEM, Blue Retro and more.
Aesthetic Touch
- We include two different colored 3D-printed spacer. If you have a 3D printer, you can print them yourself in your favourite color via downloadable STL files.
Installation Instructions
- Unscrew the four screws on the bottom of your gamecube (use a 4.5mm gamebit driver).
- Remove the top lid and unscrew the single power board screw (phillips head).
- Install the provided 3D-printed spacer. Please note, this is a snug fit and will just snap into place.
- Fit the robot_retro board in the same position as the original and replace the power board screw.
- Reassemble your console.
- System
- Nintendo GameCube
- Spare part type
- Power Supply
- WEEE registration number
- 23582226
Manufacturer
EU responsible person
MemCard PRO GC for GameCube
Dreamcast USB-C Replacement Power Supply
Powered from a 15v or 20v Power Delivery USBC charger. Most 30W USB-PD chargers will work fine.
Tested to be between 90 and 95% efficient across all loads.
Low signal noise and heat.
Drop in solution. No soldering, wires or complicated install required.
No flashing LEDS, perfect for clear shells.
Works perfectly with GDEmu and the RetroGEM.
Works with all Dreamcast models (PAL, Japanese, etc) and removes the risk of accidentally plugging in 240V into a 110V system and causing damage.
Overvoltage, over temperature and fused supply.
Includes 5V and 12V Noctua fan headers
Included 3D Spacer
Gameboy Original IPS Power Regulator Pro (Low Noise)
~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
PlayStation 1 USB-C Power Supply
Everdrive64 X7 (UltraCIC III) (Grey)
Works on ALL Nintendo 64 consoles - any region, no modifications needed
UltraCIC III chip for maximum compatibility with N64 game library
64MB SDRAM, battery-backed saves, Real Time Clock included
MicroSD slot (FAT16/FAT32) and MicroUSB port for easy file transfer
Perfect for homebrew development and legal backups of your games
Includes grey cartridge shell - just plug in and play
Jaguar GameDrive
Flash cartridge that lets you run all Atari Jaguar games and homebrew from SD card
Full EEPROM save support with data stored directly on your SD card
Compatible with FAT16/FAT32 SD cards and all common ROM formats (JAG, J64, ROM, BIN, ABS)
Beautiful menu system with optional box art and screenshot previews via MRQ files
Works with all standard Atari Jaguar consoles (without Jaguar CD attachment)
Supports 128, 512, and 2048 byte EEPROMs for complete game compatibility
RetroTink HD15 to SCART Cable
HD15 (VGA) plus 3.5mm audio to SCART connection
75Ω impedance controlled mini-coax for all video lines (RGB + Sync)
Double shielded design minimizes interference and crosstalk
Includes 470Ω attenuation resistor for safe TTL sync conversion
6ft (1.80m) cable length for flexible setup
Premium construction for the best possible retro gaming picture
RetroTink HD15 Dongle (Sega Dreamcast)
Premium coaxial design passes RGBHV signals directly from your Dreamcast
Delivers stunning 480p progressive scan video quality
Double shielded cables eliminate interference for pristine picture
Separate stereo audio output via 3.5mm jack
Requires HD15 to VGA or BNC cable (not compatible with SCART)
Durable overmolded construction built to last
Slowly fading into Data (GameBoy Color)
Sealed box
Clear Black cartridge
Instruction booklet
Silkscreened PCB with Logo on the back side
SNES Coffee Mug
Authentic Super Nintendo controller design with vibrant purple button graphics
Perfect 0.3 liter capacity for coffee, tea, or energy drinks during gaming marathons
Durable ceramic construction built for everyday use
Dishwasher safe for hassle-free cleaning
Ideal gift for retro gaming enthusiasts and SNES collectors
Officially licensed Nintendo merchandise
M64 Pro Controller
Replaceable TMR stick – driftless and customizable
Aluminum body – rigid, premium, and cool to the touch
Bluetooth SCI – ultra low-latency wireless play
Three power options – rechargeable, AA, or wired
Built-in Controller Pak and classic ERM rumble motor
PixelFX Retro G.E.M. Wii Adapter Kit
GBC Overclocker Flex Mod
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
GBA SP Overclocker Flex Mod
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
GBA Overclocker
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
PlayStation 1 USB-C Power Supply
Gameboy Original IPS Power Regulator Pro (Low Noise)
~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only



