The Anbernic RG477V in Gray is Anbernic's most powerful vertical handheld to date – featuring a Dimensity 8300 chip, 12 GB RAM, 256 GB storage, and a stunning 4.7-inch 120Hz display in classic 4:3 format.
- SoC: MediaTek Dimensity 8300 (4nm)
- RAM / Storage: 12 GB LPDDR5X / 256 GB (+ microSD up to 2 TB)
- Display: 4.7" LTPS In-Cell, 1280×960, 120 Hz, 4:3
- Battery: 5500 mAh + active cooling (fan + heat pipe)
- OS: Android 14 with Google Play
Anbernic RG477V – Gray | 12 GB / 256 GB
With the RG477V, Anbernic has built its most powerful vertical handheld to date. Instead of nostalgic restraint, this thing packs real flagship-level hardware – all in a classic upright form factor that just feels right for retro gaming.
Display & Form Factor
The 4.7-inch LTPS In-Cell panel with 1280×960 pixels and 120 Hz in 4:3 format is the ideal canvas for retro emulation: NES, SNES, Sega Genesis, PS1, Dreamcast, GameCube – all fill the screen edge-to-edge without any annoying black bars on the sides. The high pixel density delivers a sharp, vivid image that puts older 3.5-inch devices to shame. The all-glass front looks premium but attracts fingerprints – the gray model shows smudges far less than the black variant.
Performance & Emulation
At the heart of the RG477V is the MediaTek Dimensity 8300 (4nm, Mali-G615 GPU), paired with 12 GB LPDDR5X RAM. Real-world benchmarks show it comfortably outpaces similarly specced competitors like the Retroid Pocket Flip 2.
- NES / SNES / GBA / PS1 / Dreamcast: Zero issues – completely smooth gameplay across the board.
- GameCube & PS2: This is where the RG477V truly shines – up to 2.25× or even 3–4× resolution upscaling with no slowdown.
- Nintendo Switch: Limited. The Mali GPU lags behind Snapdragon chips in Switch emulation (Yuzu/Sudachi); lighter 2D/3D titles work, demanding games stutter or show graphical glitches.
Note on the Mali GPU: Occasional rendering errors can appear in GameCube titles under Vulkan (e.g. Dolphin). Switching from Vulkan to OpenGL usually resolves this. Anbernic regularly pushes OTA updates to address such issues.
Cooling & Battery
The active cooling system – fan and heat pipe combined – keeps the chip stable even during extended sessions. In normal use the fan is barely noticeable; at maximum speed a light high-pitched noise may be audible – a fair trade-off for consistent performance. The 5500 mAh battery is rated up to 8 hours; expect 3–6 hours in real-world use depending on load.
Controls & Design
Hall Effect analog sticks with RGB lighting, illuminated Start/Select buttons, and a solid D-pad make this one of the most comfortable vertical handhelds Anbernic has ever made. The wider body means thumbs no longer bump into each other – a major upgrade over older models like the RG406V. A 6-axis gyroscope and vibration motor round out the feature set.
Connectivity & Software
Wi-Fi 6E, Bluetooth 5.3, and DisplayPort output via USB-C let you hook it up to a TV as well. Android 14 with Google Play comes pre-installed, along with a selection of emulators. Tinkerers can also opt for the community firmware GammaOS as an alternative to the stock OS.
Full Specs at a Glance
| SoC | MediaTek Dimensity 8300 (4nm), Mali-G615 GPU |
| RAM | 12 GB LPDDR5X |
| Storage | 256 GB internal + microSD up to 2 TB |
| Display | 4.7" LTPS In-Cell, 1280×960, 120 Hz, 4:3, touchscreen, glass front |
| OS | Android 14 (Google Play, OTA updates) |
| Battery | 5500 mAh, fast charging |
| Cooling | Active: fan + heat pipe |
| Wi-Fi | Wi-Fi 6E |
| Bluetooth | 5.3 |
| USB | USB-C with DisplayPort output |
| Audio | Dual speakers, headphone jack, microphone |
| Sensors | 6-axis gyroscope, vibration motor |
| Controls | Hall Effect sticks, RGB joysticks, RGB Start/Select, D-pad, L/R/ZL/ZR |
| Dimensions | approx. 153×105×15–23 mm |
| Weight | approx. 334–340 g |
| Color | Gray (Retro Gray) |
- Processor
- Dimensity 8300
- Graphics processor
- Mali-G615 MC6
- Display diagonal
- 4.7
- Display resolution
- 1280 × 960
- Touchscreen
- Yes
- Ports
- 3.5mm Headset
MicroSDXC-Slot
USB3-C - Special features
- Gaming Controls
Gyroscope
Hall Sensor Analog Sticks (no stick drift)
Microphone
RGB LEDs surrounding the sticks
Vibration - Device weight (g)
- 334
- Battery category
- Secondary, 151-250g, Li-Ion
- WEEE registration number
- 23582226
- Battery capacity (mAh)
- 5500
- Device dimensions (W × H × D)
- 153 × 105 × 23 mm
- Storage capacity (GB)
- 256
- Wi-Fi
- Wi-Fi 6E
- Bluetooth
- Bluetooth 5.3
- Memory (GB)
- 12
- Memory type
- LPDDR5X
- Panel technology
- LTPS
- Refresh rate (Hz)
- 120
- Operating system family
- Android
- Operating system version
- Android 14
- Multi-touch
- Yes
- Number of analog sticks
- 2
- Form factor
- Vertical
- Video output
- USB-C DisplayPort
DRAGONBOX KNOW-HOW
Practical answers about compatibility, features and how things work.
What is the difference between Linux, Android and custom firmware on Anbernic handhelds?
Anbernic handhelds can run Linux, Android or, on some models, both. The right system depends on the games you want to play and your preferred setup.
Linux
Linux firmware usually starts directly in an emulator-focused interface, making it convenient for classic retro games. Actual performance also depends on the processor, graphics drivers and emulators.
Android
Besides emulators, Android can run native Android games and apps. Many handhelds provide better 3D support under Android, which is why demanding emulators for newer systems are often primarily developed for Android. This does not automatically make Android faster on every device.
Custom firmware
Community-developed alternatives such as muOS, KNULLI and ROCKNIX for Linux-based handhelds, or GammaOS Next for certain Android models, may provide more polished interfaces, newer emulators and better defaults. They can improve usability or performance but results vary by device.
We do not ship custom firmware preinstalled. We asked the developers, who requested that retailers do not preinstall their firmware. We respect that decision. Customers may install a compatible alternative themselves.
Installation matters: Many Linux handhelds boot from microSD, so an alternative system can often be written to a separate card while the original system card remains untouched as a fallback. Android custom firmware such as GammaOS may instead replace the system on internal storage, wipe data and risk making the device unusable if the wrong files are flashed. Always check the exact model and official installation instructions.
Our muOS beginner video demonstrates the process step by step (in German). See the individual handheld's product FAQ for compatible firmware projects.
Do Anbernic handhelds from DragonBox come with preinstalled games?
No. DragonBox Anbernic handhelds are shipped without preinstalled games. We deliberately do not include collections of commercial ROMs, which can raise serious copyright issues without the required permissions.
Everything else is prepared: Our devices already include the operating system, the necessary emulators and the usual game folders. You simply copy your own, lawfully usable game files in the correct format into the appropriate directories.
Some emulated systems also need separate BIOS files, which cannot always be included due to licensing restrictions. The exact locations and formats depend on the model and firmware.
See our other FAQ for ways to obtain compatible games or extract them from your own cartridges.
Where can I get games for my Anbernic handheld?
Anbernic handheld emulators generally use the same game files as their corresponding PC emulators. Supported systems depend on the hardware and firmware.
Dump your original cartridges: Hardware such as the Retrode with suitable adapters can read supported cartridges that you own. Be sure to follow applicable copyright rules, especially those concerning copy protection.
New games for retro systems: Developers still release new games for Game Boy, NES, Mega Drive, Amiga and many other classic platforms. Some offer authorized free downloads or demos; others sell inexpensive digital versions. Obtain files from authorized sources.
Recommendations and sources: The English-language BrewOtaku magazine covers and reviews new retro games and often tells readers where to get them. DragonBox offers BrewOtaku in digital and printed editions, with several digital issues available free of charge.
Important: Just because a ROM is available for download does not mean it can be legally downloaded. Owning the original game does not automatically authorize downloads of copies from unrelated ROM sites.
What do Anbernic handheld model numbers mean?
Many Anbernic model names give clues about the screen size, device family and body shape, but there is no perfectly consistent naming scheme for every model.
Take the RG40XX H as an example:
- RG identifies the retro gaming handheld family.
- 40 refers here to the 4.0-inch display. Similarly, RG35XX models usually have 3.5-inch screens and RG28XX models have 2.8-inch screens.
- XX identifies a device family. More recent XX models such as the RG40XX H generally use the Allwinner H700, but XX is not a universally valid processor designation.
- H means horizontal, referring to the landscape-style layout.
Other common suffixes include V for a vertical Game Boy-style layout, SP for a clamshell design and, in some series, M for a metal shell. Plus and Pro indicate variants or generations rather than a consistent level of performance.
For example, RG40XX H and RG40XX V differ primarily in their body shape and control layout, while the RG35XX SP uses a clamshell design.
Exceptions: Names such as RG Cube, RG DS and other newer device families do not follow all these rules. Always check the product page for the actual processor, OS, display and emulation performance.
Which custom firmware can I use on the Anbernic RG477V?
GammaOS Next officially lists the Anbernic RG477V as supported and provides alternative Android firmware for this model.
Installation: The developers document the RG557, RG477M and RG477V procedure in the official GammaOS Next wiki (SP Flash Tool and a Windows PC). Flashing changes internal storage and can erase all data. Back up everything and carefully follow the guide for your exact device.
Especially important: We stock RG477V versions with 128 GB (#3464) and 256 GB (#3463). The flashing configuration must match your exact storage size. Wrong flashing files may render the device unusable.
Not a microSD swap: Unlike many Linux handhelds, GammaOS cannot simply be tested by inserting another game microSD card. If you only want a different interface, consider installing an Android launcher instead.
DragonBox does not preinstall custom firmware.
How do I add my own games to an Anbernic handheld?
Our Anbernic handhelds already include emulators and the expected game folders. Games are not included; you can add your own game files that you are entitled to use.
- Check the format: Depending on the emulator, supported files may include ROM files, ZIP archives or disc images such as CHD and matching BIN/CUE files.
- Transfer your files: Linux handhelds often allow access via microSD or network services. Android models may support USB file transfer, a file manager or microSD storage.
- Use the correct folder: On muOS, games go under ROMS; on KNULLI, they belong in roms in user storage. Android paths depend on the emulator and frontend.
- Refresh the game list: If a game is missing, rescan the folder or assign a suitable emulator/core.
Important: Never format or overwrite the system card just to copy game files. Back up existing files first.
What are BIOS files, and do I need them for my Anbernic handheld?
BIOS files contain part of a console or computer’s original system software. Some emulators require them to start, while others work without a BIOS or use one optionally for better accuracy.
Why are they not all preinstalled? Many BIOS files are copyrighted. They are not automatically included with an emulator and cannot simply be redistributed without permission.
Where do they go? The location depends on the firmware. On muOS, use MUOS/bios and its BIOS checking feature. On KNULLI, use the bios folder on user storage; Missing BIOS check helps identify missing or mismatched files. On Android, the required folder depends on the emulator.
Important: The exact filename, version and sometimes checksum matter. Follow the emulator’s documentation and only use BIOS files you are legally entitled to use.
What is the difference between game saves and save states, and how can I back them up?
There are two different ways to save progress on a retro handheld:
- Normal in-game saves: Use the game’s own save function, just like on the original console. These files often work with other emulators for the same system, but may need renaming or conversion.
- Save states: The emulator saves a snapshot of the running game so you can resume at almost any point. These files often depend on the exact emulator/core and sometimes even its version.
Our recommendation: Use in-game saving whenever possible for long-term progress. Save states are useful extras but should not replace normal saves and backups. Updating or switching emulators can make old save states incompatible.
Where are the files? This depends on firmware and emulator. KNULLI keeps them under saves in user storage. On muOS, saves and other user files are kept in the MUOS directory structure. On Android, RetroArch and standalone emulators can use different locations.
Before changing firmware: Back up both normal game saves and save states to a PC or another drive. Do not copy only the game files. Moving saves between handhelds requires compatible games, emulators, filenames and save formats.
Can I replace or upgrade the microSD card in my Anbernic handheld?
On many Anbernic handhelds, yes. The procedure depends on whether the microSD card stores only games or also contains the operating system. Not every model has two card slots, and some Android devices boot from internal storage.
- Game-only storage: After making a backup, copy the games and any required data to a compatible, appropriately formatted larger card, keeping the folder structure intact.
- Linux system card: If the operating system is on the microSD card, simply copying visible files is usually not enough. The new card must be prepared with the correct system image, or the original card must be cloned completely. Partition layout and actual card capacity also matter.
- Two card slots: Depending on firmware, the system and game data can be stored on separate cards. On KNULLI, the second card has to be selected as the user-data drive. The two storage areas are not automatically combined.
FAT32, exFAT or ext4? The firmware determines the correct filesystem. KNULLI, for example, supports exFAT and ext4 for user storage. Windows normally cannot read ext4 without additional software. Never format a card just because Windows prompts you to!
Before replacing a card: Back up games, BIOS files, normal saves, save states and personal settings separately. Test the new card completely before erasing the old one.
How can I safely update the firmware on my Anbernic handheld?
A firmware update is different from updating an emulator. Firmware includes the operating system and its configuration. Depending on the platform, emulators and cores can also receive separate updates.
Linux handhelds: Follow the instructions for the firmware actually installed on your device. muOS / MustardOS generally recommends backing up your data and flashing a fresh system image for major version changes. KNULLI supports different update methods depending on the release, including smaller updates, over-the-air updates or a newly flashed image. Major upgrades may require a clean installation. On devices with two microSD slots, keeping user data on a separate card can make the process easier, but it is not a substitute for a backup.
Android handhelds: For normal system updates, use only the updater or official firmware files intended for the exact model. Apps and emulators can often be updated separately. Installing alternative Android firmware such as GammaOS Next is a different flashing procedure that can change internal storage and erase data.
Before any major update: Back up game saves, save states, BIOS files, personal settings and, if appropriate, the entire system card. Verify the exact device model and release notes, download only from official sources and keep the device powered reliably. Never interrupt a flash or update procedure.
If your system already works well: There is no need to install every update immediately. Read the release notes for fixes, new features and known issues that matter to your device.
Manufacturer
Shenzhen Yangliming Electronic Technology Co.,
No. 2 Road, Baoan, No. 71 Area
2th Floor, Environmental Monitoring Station, Liuxian
518000 Shenzhen, Guangdong
China
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
You might also like
chat
Comments (0)
Anbernic RG 477V Carry Case
Last items in stock
The official Anbernic carrying bag for the RG477V – tailor-made for your powerhouse handheld, with a soft velvety interior lining for maximum protection. Features the Anbernic logo on the outside.
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
€9.99
Kingston Canvas Select Plus 128GB microSD Card (Class 10)
Out-of-Stock
The Kingston Canvas Select Plus 128GB microSD card is your perfect companion for retro gaming with flash carts and handheld consoles.
128GB storage capacity for huge game libraries
Class 10 speed rating with up to 100MB/s read speeds
Perfect compatibility with Anbernic handhelds and flash carts
Reliable performance for smooth retro gaming
Ideal for storing ROM collections and save states
128GB storage capacity for huge game libraries
Class 10 speed rating with up to 100MB/s read speeds
Perfect compatibility with Anbernic handhelds and flash carts
Reliable performance for smooth retro gaming
Ideal for storing ROM collections and save states
€22.00
Sonic the Hedgehog - Soft PVC Keychain
In Stock
Sonic strikes his iconic "Win" pose – as a soft PVC keychain with flexible rubber and metal key ring included. Officially licensed Sonic the Hedgehog merch.
Design: Sonic the Hedgehog in Victory/Win pose
Material: Soft, flexible PVC rubber
Includes: Metal key ring
Licence: Officially licensed product
Design: Sonic the Hedgehog in Victory/Win pose
Material: Soft, flexible PVC rubber
Includes: Metal key ring
Licence: Officially licensed product
€9.00
Anbernic RG 477V Carry Case
Last items in stock
The official Anbernic carrying bag for the RG477V – tailor-made for your powerhouse handheld, with a soft velvety interior lining for maximum protection. Features the Anbernic logo on the outside.
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
€9.99
Anbernic RG477V (8GB RAM, 128GB Storage, Android 14)
In Stock
The Anbernic RG477V is Anbernic's most powerful vertical handheld to date – featuring the Dimensity 8300, a 4.7" 120Hz display in classic 4:3 format, and Android 14. This version comes with 8GB RAM and 128GB storage in Black.
SoC: MediaTek Dimensity 8300 (4nm)
Display: 4.7" LTPS In-Cell, 1280×960, 4:3, 120Hz
RAM / Storage: 8GB LPDDR5X / 128GB (microSD up to 2TB)
Battery: 5,500mAh with fast charging
OS: Android 14 with Google Play
SoC: MediaTek Dimensity 8300 (4nm)
Display: 4.7" LTPS In-Cell, 1280×960, 4:3, 120Hz
RAM / Storage: 8GB LPDDR5X / 128GB (microSD up to 2TB)
Battery: 5,500mAh with fast charging
OS: Android 14 with Google Play
From
€359.00
Anbernic RG Vita / Vita Pro Carry Case
In Stock
The official Anbernic protective bag – tailored specifically for the RG Vita and RG Vita Pro. Soft padded interior, sturdy exterior: your handheld travels safely.
Perfect fit for Anbernic RG Vita & RG Vita Pro
Soft padded inner lining for scratch-free protection
Guards against dust, scratches, and minor impacts
Compact and lightweight – great for on-the-go
Handheld not included – bag only
Perfect fit for Anbernic RG Vita & RG Vita Pro
Soft padded inner lining for scratch-free protection
Guards against dust, scratches, and minor impacts
Compact and lightweight – great for on-the-go
Handheld not included – bag only
€9.99
Anbernic RG Vita Pro (Android 14, Linux)
Last items in stock
The Anbernic RG Vita Pro is a stylish retro handheld with a PS Vita-inspired design, delivering smooth emulation of your entire retro library from 8-bit classics to PSP, N64, and Dreamcast – plus modern mobile gaming and PC ports thanks to its Android 14 & Linux dual-OS.
Emulation sweet spot: Excellent up to PSP, N64 & Dreamcast – PS2/GameCube with caveats
Dual-OS: Android 14 + Linux, switchable at boot (installed on a 16GB SD Card)
Display: 5.5-inch 1080p IPS touchscreen (16:9)
Hall-effect sticks with RGB lighting, 5,000 mAh battery, Wi-Fi 6
AI features: Real-time translation, one-click game guides & more
Emulation sweet spot: Excellent up to PSP, N64 & Dreamcast – PS2/GameCube with caveats
Dual-OS: Android 14 + Linux, switchable at boot (installed on a 16GB SD Card)
Display: 5.5-inch 1080p IPS touchscreen (16:9)
Hall-effect sticks with RGB lighting, 5,000 mAh battery, Wi-Fi 6
AI features: Real-time translation, one-click game guides & more
From
€199.00
Anbernic RG 35xx Pro (incl. Carry Case)
In Stock
Compact Linux handheld focused on classic consoles and quick pick-up-and-play sessions.
3.5" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
3.5" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€75.00
Anbernic RG RG 476H (Android 13) (incl. Carry Case)
Last items in stock
Android handheld designed for more demanding emulation and modern retro gaming features.
4.7" LTPS display (1280×960, 4:3)
Android 13
Strong performance up to PSP/Dreamcast. PS2 is often playable; GameCube can struggle depending on the game.
Official carrying case included
4.7" LTPS display (1280×960, 4:3)
Android 13
Strong performance up to PSP/Dreamcast. PS2 is often playable; GameCube can struggle depending on the game.
Official carrying case included
From
€229.00
Anbernic RG477M (12GB RAM, 256GB Storage)
In Stock
Android handheld designed for more demanding emulation and modern retro gaming features.
4.7" LTPS display (1280×960, 4:3)
Android 14
High-end emulation performance: PS2 runs very well and GameCube is generally solid, depending on the emulator and game.
Official carrying case included
4.7" LTPS display (1280×960, 4:3)
Android 14
High-end emulation performance: PS2 runs very well and GameCube is generally solid, depending on the emulator and game.
Official carrying case included
From
€359.00
Anbernic RG34xx (incl. Carry Case and SD Card)
In Stock
GBA-style handheld with a crisp 3:2 screen that suits handheld-era classics perfectly.
3.4" IPS display (720×480, 3:2)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
3.4" IPS display (720×480, 3:2)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€85.00
Anbernic RG40xxV Handheld (incl. Carry Case and SD Card)
In Stock
Budget-friendly handheld with a larger screen for comfortable classic retro play.
4.0" IPS display (640×480, 4:3)
Linux
64GB SD Card included
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
4.0" IPS display (640×480, 4:3)
Linux
64GB SD Card included
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€89.00
Anbernic RG40xxH (incl. Carry Case and SD Card)
In Stock
Budget-friendly handheld with a larger screen for comfortable classic retro play.
4.0" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
4.0" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€89.00
Anbernic RG 477V Carry Case
Last items in stock
The official Anbernic carrying bag for the RG477V – tailor-made for your powerhouse handheld, with a soft velvety interior lining for maximum protection. Features the Anbernic logo on the outside.
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
Perfect fit for the Anbernic RG477V
Soft velvety interior padding protects against scratches
Extra room for charging cable & accessories
Official Anbernic accessory with logo
€9.99
Anbernic RG477V (8GB RAM, 128GB Storage, Android 14)
In Stock
The Anbernic RG477V is Anbernic's most powerful vertical handheld to date – featuring the Dimensity 8300, a 4.7" 120Hz display in classic 4:3 format, and Android 14. This version comes with 8GB RAM and 128GB storage in Black.
SoC: MediaTek Dimensity 8300 (4nm)
Display: 4.7" LTPS In-Cell, 1280×960, 4:3, 120Hz
RAM / Storage: 8GB LPDDR5X / 128GB (microSD up to 2TB)
Battery: 5,500mAh with fast charging
OS: Android 14 with Google Play
SoC: MediaTek Dimensity 8300 (4nm)
Display: 4.7" LTPS In-Cell, 1280×960, 4:3, 120Hz
RAM / Storage: 8GB LPDDR5X / 128GB (microSD up to 2TB)
Battery: 5,500mAh with fast charging
OS: Android 14 with Google Play
From
€359.00
Anbernic RG Vita / Vita Pro Carry Case
In Stock
The official Anbernic protective bag – tailored specifically for the RG Vita and RG Vita Pro. Soft padded interior, sturdy exterior: your handheld travels safely.
Perfect fit for Anbernic RG Vita & RG Vita Pro
Soft padded inner lining for scratch-free protection
Guards against dust, scratches, and minor impacts
Compact and lightweight – great for on-the-go
Handheld not included – bag only
Perfect fit for Anbernic RG Vita & RG Vita Pro
Soft padded inner lining for scratch-free protection
Guards against dust, scratches, and minor impacts
Compact and lightweight – great for on-the-go
Handheld not included – bag only
€9.99
Anbernic RG Vita Pro (Android 14, Linux)
Last items in stock
The Anbernic RG Vita Pro is a stylish retro handheld with a PS Vita-inspired design, delivering smooth emulation of your entire retro library from 8-bit classics to PSP, N64, and Dreamcast – plus modern mobile gaming and PC ports thanks to its Android 14 & Linux dual-OS.
Emulation sweet spot: Excellent up to PSP, N64 & Dreamcast – PS2/GameCube with caveats
Dual-OS: Android 14 + Linux, switchable at boot (installed on a 16GB SD Card)
Display: 5.5-inch 1080p IPS touchscreen (16:9)
Hall-effect sticks with RGB lighting, 5,000 mAh battery, Wi-Fi 6
AI features: Real-time translation, one-click game guides & more
Emulation sweet spot: Excellent up to PSP, N64 & Dreamcast – PS2/GameCube with caveats
Dual-OS: Android 14 + Linux, switchable at boot (installed on a 16GB SD Card)
Display: 5.5-inch 1080p IPS touchscreen (16:9)
Hall-effect sticks with RGB lighting, 5,000 mAh battery, Wi-Fi 6
AI features: Real-time translation, one-click game guides & more
From
€199.00
Anbernic RG G01 Controller (incl. Smartphone Holder)
In Stock
The Anbernic RG G01 is a smart multi-platform controller featuring a built-in 2.5D IPS display, drift-resistant electro-inductive sticks, and an integrated heart rate sensor – a true one-of-a-kind in the controller world.
Platforms: PC / Steam / Linux / Switch / Switch 2 / Android / iOS
Connection: Bluetooth 5.0 / 2.4GHz wireless / Wired (USB-C)
Polling rate: 1000Hz (wired & 2.4GHz)
Battery: 2100mAh – up to 21 hours playtime
Colors: White / Yellow / Black
Platforms: PC / Steam / Linux / Switch / Switch 2 / Android / iOS
Connection: Bluetooth 5.0 / 2.4GHz wireless / Wired (USB-C)
Polling rate: 1000Hz (wired & 2.4GHz)
Battery: 2100mAh – up to 21 hours playtime
Colors: White / Yellow / Black
From
€59.00
Anbernic RG 35xx Pro (incl. Carry Case)
In Stock
Compact Linux handheld focused on classic consoles and quick pick-up-and-play sessions.
3.5" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
3.5" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€75.00
Anbernic RG RG 476H (Android 13) (incl. Carry Case)
Last items in stock
Android handheld designed for more demanding emulation and modern retro gaming features.
4.7" LTPS display (1280×960, 4:3)
Android 13
Strong performance up to PSP/Dreamcast. PS2 is often playable; GameCube can struggle depending on the game.
Official carrying case included
4.7" LTPS display (1280×960, 4:3)
Android 13
Strong performance up to PSP/Dreamcast. PS2 is often playable; GameCube can struggle depending on the game.
Official carrying case included
From
€229.00
Anbernic RG477M (12GB RAM, 256GB Storage)
In Stock
Android handheld designed for more demanding emulation and modern retro gaming features.
4.7" LTPS display (1280×960, 4:3)
Android 14
High-end emulation performance: PS2 runs very well and GameCube is generally solid, depending on the emulator and game.
Official carrying case included
4.7" LTPS display (1280×960, 4:3)
Android 14
High-end emulation performance: PS2 runs very well and GameCube is generally solid, depending on the emulator and game.
Official carrying case included
From
€359.00
Anbernic RG34xx (incl. Carry Case and SD Card)
In Stock
GBA-style handheld with a crisp 3:2 screen that suits handheld-era classics perfectly.
3.4" IPS display (720×480, 3:2)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
3.4" IPS display (720×480, 3:2)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€85.00
Anbernic RG40xxV Handheld (incl. Carry Case and SD Card)
In Stock
Budget-friendly handheld with a larger screen for comfortable classic retro play.
4.0" IPS display (640×480, 4:3)
Linux
64GB SD Card included
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
4.0" IPS display (640×480, 4:3)
Linux
64GB SD Card included
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€89.00
Anbernic RG40xxH (incl. Carry Case and SD Card)
In Stock
Budget-friendly handheld with a larger screen for comfortable classic retro play.
4.0" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
4.0" IPS display (640×480, 4:3)
Linux
incl. 64GB SD Card
Handles 8-bit/16-bit systems and PS1 smoothly. N64, Dreamcast and PSP can be hit-or-miss depending on the game.
Official carrying case included
From
€89.00



