Upgrade your Atari Lynx 2 with a brand new IPS screen! Probably the easiest-to-install IPS screen on the market.
The RetroSix IPS Screen for the Lynx is one of the best and easiest-to-install aftermarket screens for Ataris handheld.
The kit fitsthe Lynx II. It's solder free - just plug in the cables.
In case you don't want to do that yourself, we also offer an install service.
Holding Left, A and B brings up the On Screen Menu, then pressing B enters the menu while Left and A (right) go left and right in the menu.
Options in the menu include pixel grids, colour modes and VGA output (if you soldered in a VGA Port).
Kit Includes:
- 1x Atari Lynx CleanScreen Board
- 1x Atari Lynx CleanScreen LCD Ribbon
- 1x Atari Lynx CleanScreen Button Ribbon
- 1x Atari Lynx IPS Screen
- 1x Atari Lynx II CleanScreen LCD Bracket
- System
- Atari Lynx
- Brand compatibility
- Atari
Manufacturer
SIX RETRO LIMITED
156 Bagnall Road
ST2 7LW Stoke-on-Trent
United Kingdom
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
chat
Comments (1)
- chevron_left
- 1
- chevron_right
In Stock
Replace the power circuit of your Atari Lynx I or II and add a standard USB Port as power supply! You can optionally install LiPo Batteries as further upgrade.
€25.00
Lynx GameDrive
In Stock
The Lynx GameDrive brings your entire Atari Lynx library onto a single MicroSD card with blazing-fast load times and homebrew support.
Play all Atari Lynx games and homebrew from one MicroSD/MMC card
Lightning-fast loading: even the largest games load in under 1 second
EEPROM save game support for compatible homebrew titles
Works with Atari Lynx I, Lynx II, and ComLynx Play systems
User-friendly game selection menu for easy navigation
Supports FAT16 and FAT32 formatted memory cards
Play all Atari Lynx games and homebrew from one MicroSD/MMC card
Lightning-fast loading: even the largest games load in under 1 second
EEPROM save game support for compatible homebrew titles
Works with Atari Lynx I, Lynx II, and ComLynx Play systems
User-friendly game selection menu for easy navigation
Supports FAT16 and FAT32 formatted memory cards
€110.00
SEGA MegaDrive 2 CleanPower
In Stock
Use a standard USB-PD power supply to power your original Sega Mega Drive 2. The installation requires soldering skills.
€19.00
BrewOtaku Issue 4 - Printed Version (incl. PDF)
In Stock
BrewOtaku Issue 4 celebrates the thriving world of homebrew gaming with 74 pages dedicated to new releases for your favorite retro systems!Comprehensive coverage of new games for classic consoles and computersIn-depth reviews of over 20 homebrew titles across multiple platformsExclusive interview with Dave Nemeth, creator of Panzer seriesFeatures on Alex Kidd series and multi-platform arcade game designPhysical printed magazine plus instant PDF download includedWritten entirely in English for the global retro gaming community
€5.99
PlayStation Coffee Mug
Out-of-Stock
Power up your mornings with this officially licensed PlayStation coffee mug showcasing the iconic controller button symbols.
Official PlayStation merchandise featuring classic button symbols
Perfect 0.3 L capacity for coffee, tea, or any hot beverage
High-quality ceramic construction built for daily use
Ideal gift for PlayStation fans and collectors
Features the legendary triangle, circle, X, and square icons
Official PlayStation merchandise featuring classic button symbols
Perfect 0.3 L capacity for coffee, tea, or any hot beverage
High-quality ceramic construction built for daily use
Ideal gift for PlayStation fans and collectors
Features the legendary triangle, circle, X, and square icons
€11.00
Zelda Hyrule Crest Soft PVC Keychain
Last items in stock
Carry the legendary symbol of Hyrule everywhere with this officially licensed soft PVC keychain featuring the iconic Hyrule Crest.
Official Tears of the Kingdom merchandise
Iconic Hyrule Crest design in vibrant detail
Durable soft PVC material that won't scratch
Perfect for keys, bags, and backpacks
Compact and lightweight accessory
Essential gift for any Zelda fan
Official Tears of the Kingdom merchandise
Iconic Hyrule Crest design in vibrant detail
Durable soft PVC material that won't scratch
Perfect for keys, bags, and backpacks
Compact and lightweight accessory
Essential gift for any Zelda fan
€9.00
Atari Lynx 1 CleanScreen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (IPS) replaces the dim, power-hungry original screen of your Atari Lynx with a modern IPS display – vibrant colors, high contrast and significantly better battery life.
Modern IPS display – vivid colors, high contrast, wide viewing angles
Ultra-low power consumption – more playtime per set of batteries
On-Screen Menu with pixel grid, color modes & VGA output
Solder-free for Lynx II, simple soldering required for Lynx I
Compatible with Atari Lynx I only
Modern IPS display – vivid colors, high contrast, wide viewing angles
Ultra-low power consumption – more playtime per set of batteries
On-Screen Menu with pixel grid, color modes & VGA output
Solder-free for Lynx II, simple soldering required for Lynx I
Compatible with Atari Lynx I only
€79.00
Atari Lynx Cleanpower + USB-C-Port
In Stock
Replace the power circuit of your Atari Lynx I or II and add a standard USB Port as power supply! You can optionally install LiPo Batteries as further upgrade.
€25.00
Atari 2600 CleanComp
Last items in stock
Say goodbye to muddy RF output! The RetroSix CleanComp mod kit gives your Atari 2600 a clean composite and S-Video signal – tapped directly from the TIA chip, not just re-amplified noise. Includes board + cable.
Composite & S-Video output in one kit
Supports PAL & NTSC consoles
No components need to be desoldered – original hardware stays intact
Adjustable colour saturation for your display
Composite & S-Video output in one kit
Supports PAL & NTSC consoles
No components need to be desoldered – original hardware stays intact
Adjustable colour saturation for your display
€35.00
Game Gear RePCB New Motherboard (1-ASIC)
In Stock
The RetroSix Game Gear RePCB (1-ASIC) is a complete ground-up redesign of the original Game Gear motherboard for all VA1/2/4/5 variants – loaded with modern improvements to audio, stability, and ease of use.
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
€59.00
Game Gear RePCB New Motherboard (2-ASIC)
In Stock
The Game Gear RePCB (2-ASIC) by RetroSix is a completely redesigned motherboard for the Sega Game Gear VA0 – the ideal foundation for a clean, high-quality console rebuild.
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
€59.00
Game Gear Speaker
In Stock
The RetroSix replacement speaker for the Sega Game Gear is your go-to fix when the original speaker in your Game Gear has given up. Ready to go thanks to a pre-soldered cable with a matching plug – no guessing, just plug it in and get back to gaming.
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
€3.00
Game Gear CleanAmp Duo (Stereo & Mono Audio Amplifier)
In Stock
The RetroSix CleanAmp Duo is the ultimate audio upgrade for your Sega Game Gear – delivering massive volume, true stereo sound and a fully restored tonal range the original hardware never offered.
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
€29.00
Game Gear Shell Kit (Clear Black)
In Stock
Your Sega Game Gear looking a bit rough after all these years? The RetroSix Prestige Shell Kit in Clear Black is a complete replacement housing made from Japanese ABS – transparent black, tight tolerances, better fit than stock.
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
€29.00
Game Gear Shell Kit (LIMITED EDITION Sapphire)
In Stock
The RetroSix Game Gear Shell Kit in Sapphire is a limited edition, transparent blue replacement housing for your Sega Game Gear – premium quality, complete, and ready to install.
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
€35.00
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
SNES Edgebuster
In Stock
Say goodbye to the classic SNES ghosting issue! The RetroSix SNES EdgeBuster is a compact mod board that eliminates the well-known left-to-right smearing and edge blur from your Super Nintendo's RGB and composite video output – without any loss of color or detail.
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
€15.00
CleanRGB Universal
In Stock
The RetroSix CleanRGB Universal is a fully active DC RGB mod board that cleans up your retro console's video signal at the source – no capacitors, no AC coupling, no more band-aid «smart cables».
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
€29.00
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
Game Gear Shell Kit (Master System Clear Black)
In Stock
The RetroSix Prestige Shell Kit for the Sega Game Gear in Master System Clear Black – a premium ABS full replacement shell kit featuring an iconic Sega Master System-inspired design in a sleek transparent black finish.
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
€25.00
Game Boy Advance CleanScreen Screen Kit (IPS)
Last items in stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00

