This is a brand new IPS LCD for your GameBoy color. It's a bit bigger than the original screen, and a lot more better looking.
The Game Boy Color brings a ravishing rainbow of over 32,000 possible colours to the bright 44 x 39mm screen, along with twice the processing power of its monochrome sibling.
This brand new Q5 XL IPS kit comes with IPS screen and control board. The LCD is larger than the original, so we include a perfectly fitting new glass front as well.
To install it into an original GameBoy Color Shell, a few plastic pegs inside the shell need to be cut.
If you don't want to install it yourself, you can also use our service.
The Features:
- Built-in OSD Menu
- The display area is 15% larger than the original.
- Retro pixel effect can be turned on & off.
- Image position is adjustable. No need to worry about misalignment of the LCD screen during the installation.
- Battery level display can be turned on & off.
- Wide view angle up to 178 degree
- OPTIONAL: You need to solder 3 wires to control the on screen display menu, if you want to do that.
You don't need to do any soldering if you don't want to use the OSD Menu! You can also change brightness and color using the touchpad connectors, but the OSD is more comfortable.
Please note: We cannot take any responsibility for any damages that happen because of incorrect or badly done installations.
Install at your own risk!
- System
- Game Boy Color
- Brand compatibility
- Nintendo
Manufacturer
SIX RETRO LIMITED
156 Bagnall Road
ST2 7LW Stoke-on-Trent
United Kingdom
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
chat
Comments (0)
In Stock
A drop-in USB-C power supply replacement for your PlayStation 1. Extremely reliable, supports fans and the power LED can be set to different colors.
€49.00
GBC Overclocker Flex Mod
In Stock
The Game Boy Color Overclocker Flex by robot_retro replaces the original GBC crystal and puts you in full control of your Game Boy Color's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. The flex PCB design eliminates almost all manual wiring.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
€29.00
Installation of GameBoy Color IPS LCD (Kit is included)
In Stock
This is a brand new IPS LCD for your GameBoy color. It's a bit bigger than the original screen, and a lot more better looking.
€115.00
Gameboy Original IPS Power Regulator Pro (Low Noise)
In Stock
The Game Boy Original IPS Power Regulator Pro (Low Noise) by Robot Retro is a direct solder-in replacement for the stock DMG-01 power supply – purpose-built for IPS screen mods. Note: Does not work with the original Game Boy screen.
~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
€19.00
GameBoy Pocket Screen Protector (Glass)
In Stock
Scratch-resistant glass screen lens replacement for the Game Boy Pocket – gets your display looking crystal clear again.
Designed to fit the Game Boy Pocket perfectly, replacing the original screen lens like for like.
Premium glass material delivers a noticeably cleaner, crisper view compared to standard plastic replacements.
Reliably shields the LCD from scratches, dust, and everyday bumps.
Designed to fit the Game Boy Pocket perfectly, replacing the original screen lens like for like.
Premium glass material delivers a noticeably cleaner, crisper view compared to standard plastic replacements.
Reliably shields the LCD from scratches, dust, and everyday bumps.
€4.00
GameBoy Screen Protector (Glass)
In Stock
A brand new replacement screen lens in scratch-resistant glass for the original Nintendo GameBoy – perfect when your old one is cloudy, scratched, or cracked.
A direct, precise fit for the original GameBoy (DMG-01) – giving your classic handheld a clean, clear look again.
Made from scratch-resistant glass for lasting protection well beyond the original plastic lens.
Great for anyone who enjoys repairing or restoring their own hardware.
A direct, precise fit for the original GameBoy (DMG-01) – giving your classic handheld a clean, clear look again.
Made from scratch-resistant glass for lasting protection well beyond the original plastic lens.
Great for anyone who enjoys repairing or restoring their own hardware.
€5.00
Game Gear RePCB New Motherboard (1-ASIC)
In Stock
The RetroSix Game Gear RePCB (1-ASIC) is a complete ground-up redesign of the original Game Gear motherboard for all VA1/2/4/5 variants – loaded with modern improvements to audio, stability, and ease of use.
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
€59.00
Game Gear RePCB New Motherboard (2-ASIC)
In Stock
The Game Gear RePCB (2-ASIC) by RetroSix is a completely redesigned motherboard for the Sega Game Gear VA0 – the ideal foundation for a clean, high-quality console rebuild.
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
€59.00
Game Gear Speaker
In Stock
The RetroSix replacement speaker for the Sega Game Gear is your go-to fix when the original speaker in your Game Gear has given up. Ready to go thanks to a pre-soldered cable with a matching plug – no guessing, just plug it in and get back to gaming.
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
€3.00
Game Gear CleanAmp Duo (Stereo & Mono Audio Amplifier)
In Stock
The RetroSix CleanAmp Duo is the ultimate audio upgrade for your Sega Game Gear – delivering massive volume, true stereo sound and a fully restored tonal range the original hardware never offered.
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
€29.00
Game Gear Shell Kit (Clear Black)
In Stock
Your Sega Game Gear looking a bit rough after all these years? The RetroSix Prestige Shell Kit in Clear Black is a complete replacement housing made from Japanese ABS – transparent black, tight tolerances, better fit than stock.
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
€29.00
Game Gear Shell Kit (LIMITED EDITION Sapphire)
In Stock
The RetroSix Game Gear Shell Kit in Sapphire is a limited edition, transparent blue replacement housing for your Sega Game Gear – premium quality, complete, and ready to install.
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
€35.00
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
SNES Edgebuster
In Stock
Say goodbye to the classic SNES ghosting issue! The RetroSix SNES EdgeBuster is a compact mod board that eliminates the well-known left-to-right smearing and edge blur from your Super Nintendo's RGB and composite video output – without any loss of color or detail.
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
€15.00
CleanRGB Universal
In Stock
The RetroSix CleanRGB Universal is a fully active DC RGB mod board that cleans up your retro console's video signal at the source – no capacitors, no AC coupling, no more band-aid «smart cables».
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
€29.00
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
Game Gear Shell Kit (Master System Clear Black)
In Stock
The RetroSix Prestige Shell Kit for the Sega Game Gear in Master System Clear Black – a premium ABS full replacement shell kit featuring an iconic Sega Master System-inspired design in a sleek transparent black finish.
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
€25.00
Game Boy Advance CleanScreen Screen Kit (IPS)
Last items in stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00

