The RetroSix SNES / N64 CleanRGB SCART Cable is the perfect companion to the CleanRGB mod – delivering a clean, noise-free RGB signal straight to your SCART input. Important: This cable is designed for use with the CleanRGB mod and does not work correctly with an unmodified console, as it outputs incorrect video levels.
- Double-shielded high-quality cable – no noise, no crosstalk
- Passive & straight-through – no hidden capacitors or resistors inside
- Carries pure RGB video & stereo audio
- Custom SCART connector with ultrasonic-welded housing
- Compatible with SNES and RGB-modded N64
RetroSix SNES / N64 CleanRGB SCART Cable – the honest RGB cable
RGB is unquestionably the best analogue video output you can get from your retro console. But not all cables are created equal – and that's exactly where RetroSix draws the line. The CleanRGB SCART Cable is not a "smart cable" stuffed with capacitors and resistors as a band-aid fix. It's a purely passive, double-shielded cable that carries your signal exactly as it leaves the CleanRGB mod: clean, unaltered and without additional losses.
⚠️ Important: CleanRGB Mod Required!
This cable is specifically designed to be used together with the RetroSix CleanRGB mod – which is also available in our shop. An unmodified SNES or N64 outputs incorrect video levels (the NTSC SNES, for example, has a DC offset on the RGB lines) that this straight-through cable will not correct. The result would be an overdriven, discoloured or otherwise faulty picture. The CleanRGB mod fixes this problem at the source – the cable then cleanly transports the already correct signal to your TV.
What's inside the cable?
Nothing but top-notch engineering: the cable uses double-shielded, high-quality coaxial wire manufactured fresh each batch. The SCART connector sits on a custom PCB with an ultrasonic-welded housing – no wobbly contacts, no cheap plastic plug. Inside: no capacitors, no resistors, no surprises. Straight-through from console to TV, just as it should be.
Compatibility
- SNES / Super Famicom (with CleanRGB mod)
- Nintendo 64 (with RGB mod outputting CSYNC on pin 3 of the AV Multi-Out)
What does it carry?
- Pure RGB video signal (RGBs with CSync)
- Stereo audio (L + R)
The CleanRGB philosophy
RetroSix has taken a no-compromise approach with the CleanRGB line: instead of masking problems inside the cable, they are fixed at the source by the mod. The cable stays simple, reliable and future-proof. For installation details, visit the RetroSix Wiki at retrosix.wiki – select your console and choose »CleanRGB Install«. The active RetroSix Discord community is also on hand if you have any questions.
Manufacturer
SIX RETRO LIMITED
156 Bagnall Road
ST2 7LW Stoke-on-Trent
United Kingdom
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
You might also like
chat
Comments (0)
RetroTink HD15 Dongle (SNES)
In Stock
The RetroTink HD15 Dongle for SNES lets you connect your RGB-capable Super Nintendo to modern displays and scalers with pristine video quality.
Adapts SNES multi-out to HD15 (VGA-style) connector
Built-in active amplifier for proper 75 Ω video signals
Supports both NTSC and PAL SNES consoles
Double shielded cables minimize interference
Stereo audio output via 3.5mm jack
Works with RetroTink scalers and RGB-compatible displays
Adapts SNES multi-out to HD15 (VGA-style) connector
Built-in active amplifier for proper 75 Ω video signals
Supports both NTSC and PAL SNES consoles
Double shielded cables minimize interference
Stereo audio output via 3.5mm jack
Works with RetroTink scalers and RGB-compatible displays
€35.00
The SNES Pixel Book (English Version)
In Stock
Celebrate the golden age of 16-bit gaming with this stunning 272-page hardcover tribute to the Super Nintendo Entertainment System.
Meticulously translated English edition from acclaimed German publisher Elektrospieler
Tens of thousands of specially captured screenshots showcasing classics like Super Mario World, Street Fighter II, and Chrono Trigger
In-depth genre analysis exploring the evolution of SNES game design and its lasting influence
Premium hardback with spot-varnished protective slipcase produced to exceptional Bitmap Books standards
Features gigantic level maps, multi-screen bosses, and detailed montages rarely seen elsewhere
Covers everything from obscure gems to legendary titles across the SNES's massive library
Meticulously translated English edition from acclaimed German publisher Elektrospieler
Tens of thousands of specially captured screenshots showcasing classics like Super Mario World, Street Fighter II, and Chrono Trigger
In-depth genre analysis exploring the evolution of SNES game design and its lasting influence
Premium hardback with spot-varnished protective slipcase produced to exceptional Bitmap Books standards
Features gigantic level maps, multi-screen bosses, and detailed montages rarely seen elsewhere
Covers everything from obscure gems to legendary titles across the SNES's massive library
€35.00
SNES Cartridge Shell (Grey)
In Stock
A reproduction cartridge shell for SNES games – perfect for repairs, homebrew releases, or giving an old cart a clean new look.Fits all SNES consoles – Japanese, US, and European versions included.Solid build quality, equally suited for repairs, reproduction cartridges, and homebrew releases.Shell only – no PCB included, ideal if that's exactly what you need.
€2.50
Game Gear RePCB New Motherboard (1-ASIC)
In Stock
The RetroSix Game Gear RePCB (1-ASIC) is a complete ground-up redesign of the original Game Gear motherboard for all VA1/2/4/5 variants – loaded with modern improvements to audio, stability, and ease of use.
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
€59.00
Game Gear RePCB New Motherboard (2-ASIC)
In Stock
The Game Gear RePCB (2-ASIC) by RetroSix is a completely redesigned motherboard for the Sega Game Gear VA0 – the ideal foundation for a clean, high-quality console rebuild.
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
€59.00
Game Gear Speaker
In Stock
The RetroSix replacement speaker for the Sega Game Gear is your go-to fix when the original speaker in your Game Gear has given up. Ready to go thanks to a pre-soldered cable with a matching plug – no guessing, just plug it in and get back to gaming.
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
Compatible with Sega Game Gear (1990)
1 Watt / 8 Ohm – drop-in replacement for the original speaker
Pre-soldered cable with matching plug
Perfect base for a CleanAmp Duo stereo upgrade
€3.00
Game Gear CleanAmp Duo (Stereo & Mono Audio Amplifier)
In Stock
The RetroSix CleanAmp Duo is the ultimate audio upgrade for your Sega Game Gear – delivering massive volume, true stereo sound and a fully restored tonal range the original hardware never offered.
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
€29.00
Game Gear Shell Kit (Clear Black)
In Stock
Your Sega Game Gear looking a bit rough after all these years? The RetroSix Prestige Shell Kit in Clear Black is a complete replacement housing made from Japanese ABS – transparent black, tight tolerances, better fit than stock.
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Material: High-quality Japanese ABS plastic
IPS-ready: Pre-cut for IPS displays – no extra trimming needed
Compatible with original LCD and IPS displays
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
€29.00
Game Gear Shell Kit (LIMITED EDITION Sapphire)
In Stock
The RetroSix Game Gear Shell Kit in Sapphire is a limited edition, transparent blue replacement housing for your Sega Game Gear – premium quality, complete, and ready to install.
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
Limited Edition: Transparent sapphire blue – gone when it's gone
Material: High-quality Japanese ABS plastic, precisely moulded
Includes: Front & back shell, battery covers, screws, metal springs, cartridge guard, glass lens & buttons
Compatible with IPS displays and battery mods (e.g. CleanJuice USB-C)
€35.00
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
SNES Edgebuster
In Stock
Say goodbye to the classic SNES ghosting issue! The RetroSix SNES EdgeBuster is a compact mod board that eliminates the well-known left-to-right smearing and edge blur from your Super Nintendo's RGB and composite video output – without any loss of color or detail.
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
€15.00
CleanRGB Universal
In Stock
The RetroSix CleanRGB Universal is a fully active DC RGB mod board that cleans up your retro console's video signal at the source – no capacitors, no AC coupling, no more band-aid «smart cables».
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
€29.00
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
Game Gear Shell Kit (Master System Clear Black)
In Stock
The RetroSix Prestige Shell Kit for the Sega Game Gear in Master System Clear Black – a premium ABS full replacement shell kit featuring an iconic Sega Master System-inspired design in a sleek transparent black finish.
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
€25.00
Game Boy Advance CleanScreen Screen Kit (IPS)
Last items in stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00

