A replacement power supply for Dreamcast that allows you to use a standard 30W USB-C PD power supply. No need to do any soldering, just switch your old one with this.
- Powered from a 15v or 20v Power Delivery USBC charger. Most 30W USB-PD chargers will work fine.
- Tested to be between 90 and 95% efficient across all loads.
- Low signal noise and heat.
- Drop in solution. No soldering, wires or complicated install required.
- No flashing LEDS, perfect for clear shells.
- Works perfectly with GDEmu and the RetroGEM.
- Works with all Dreamcast models (PAL, Japanese, etc) and removes the risk of accidentally plugging in 240V into a 110V system and causing damage.
- Overvoltage, over temperature and fused supply.
- Includes 5V and 12V Noctua fan headers
- Included 3D Spacer
The original Dreamcast power supply has always been a bit problematic. It has a combined 110v/240v AC to DC converter which is inefficient and noisy - and can even affect the video signal.
Additionally, if you're living in an area with where 220-240V is standard, connecting a Japanese Dreamcast (which uses 110V) needs expensive hardware as well. And if you accidentally plug it directly into the your 240V wall plug, you can damage the Dreamcast.
This is being fixed when using the Robot_Retro Dreamcast Replacement Power Supply!
It has been tested with multiple mods like the RetroGEM or the GDEmu and runs stable without any issues.
- Powered from a 15v or 20v Power Delivery USBC charger. Most 30W USB-PD chargers will work fine.
- Tested to be between 90 and 95% efficient across all loads.
- Low signal noise and heat.
- Drop in solution. No soldering, wires or complicated install required.
- No flashing LEDS, perfect for clear shells.
- Works perfectly with GDEmu and the RetroGEM.
- Works with all Dreamcast models (PAL, Japanese, etc) and removes the risk of accidentally plugging in 240V into a 110V system and causing damage.
- Overvoltage, over temperature and fused supply.
- Includes 5V and 12V Noctua fan headers
- Included 3D Spacer
- System
- Sega Dreamcast
- Spare part type
- Power Supply
- Brand compatibility
- Sega
Here is a small tutorial and review video:
Here are the features in detail:
Manufacturer
EU responsible person
PlayStation 1 USB-C Power Supply
BrewOtaku Issue 3 - Printed Version (incl. PDF)
GameCube USB-C Power Supply
RetroTink HD15 Dongle (Sega Dreamcast)
Premium coaxial design passes RGBHV signals directly from your Dreamcast
Delivers stunning 480p progressive scan video quality
Double shielded cables eliminate interference for pristine picture
Separate stereo audio output via 3.5mm jack
Requires HD15 to VGA or BNC cable (not compatible with SCART)
Durable overmolded construction built to last
Amiga 4000D Capacitor-Kit
Contains all electrolytic capacitors needed for a full recap of the Amiga 4000D
High-end capacitor quality for long-lasting, reliable results
Fixes common issues like instability, picture problems, and audio glitches caused by aging capacitors
Extends the lifespan of your beloved Amiga by many years
Requires soldering — perfect for DIY enthusiasts with basic electronics skills
Retrode Plugin Pack (without N64 Joystick connector)
Tanglewood (MegaDrive / Genesis)
xStation PU-18 QSB-Board
Wingman PS2 Converter (Xbox*/PS*/Switch/Bluetooth/PC to PS1/PS2/PC)
GBC Overclocker Flex Mod
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
GBA SP Overclocker Flex Mod
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
GBA Overclocker
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
GameCube USB-C Power Supply
PlayStation 1 USB-C Power Supply
Gameboy Original IPS Power Regulator Pro (Low Noise)
~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only




