GameBoy Advance SP Conductive Pad Set
Replacement conductive pad set for the GameBoy Advance SP – the go-to fix when buttons stop registering properly or feel unresponsive.
- Designed to fit the GameBoy Advance SP perfectly.
- Brings sluggish or unresponsive buttons and D-pad back to life.
- No soldering required – just a small screwdriver and a little patience.
GBA SP Conductive Pad Set – Get Your Buttons Feeling Right Again
You know the feeling: the D-pad only registers half your inputs, and the A button needs a heroic press to do anything. More often than not, the culprit isn't the button itself – it's the conductive pad underneath. Over time these rubber pads harden, wear out, or lose their conductivity.
What's included?This is a replacement conductive pad set for the GameBoy Advance SP. The pads sit between the buttons and the PCB, closing the circuit when you press a button. When they're worn, your inputs get flaky – swap them out and you're good to go.
Who's this for?Anyone who wants to repair their GBA SP at home. Swapping the pads is beginner-friendly – you just need a small screwdriver and a bit of patience. No soldering required.
GBASP-Pad
16 Items
4260416651265
- System
- Game Boy Advance
- Spare part type
- Conductive Pad
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
You might also like
chat
Comments (0)
More from this category
GBA SP Overclocker Flex Mod
In Stock
The Game Boy Advance SP Overclocker Flex by robot_retro replaces the original GBA SP crystal and puts you in full control of your console's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. Flex PCB design, minimal wiring, developed in collaboration with RJS FPGA.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
€29.00
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
Game Boy Advance CleanScreen Screen Kit (IPS)
Last items in stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00
GBA Overclocker
In Stock
The Game Boy Advance Overclocker Flex by robot_retro replaces the original GBA crystal and gives you full control over your GBA's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
€29.00
Gameboy Advance SP USBC-PD Mod
In Stock
You'd like to charge your GBA SP using a standard USB-C power supply? This mod replaces the custom Nintendo connector with a standard USB-C PD one.
€12.00
Gameboy Advance SP USBC Mod (with audio)
In Stock
You'd like to charge your GBA SP using a standard USB-C power supply? This mod replaces the custom Nintendo connector with a standard USB-C one, including Audio support.
€19.00
GameBoy Advance Screen Protector (Glass)
In Stock
Replace the scratched or cracked screen lens on your GameBoy Advance with a brand new scratch-resistant glass cover.Designed as a direct, precise fit replacement for the original GameBoy Advance screen lens.Made from scratch-resistant glass for a permanently clear view of your game.Perfect for retro gaming fans, modders, and tinkerers looking to restore their GBA.
€5.00

