GBA Overclocker Flex – robot_retro | Clock Speed Mod
zoom_out_map
Sold items

This item has been sold

4
times
GBA Overclocker Flex – robot_retro | Clock Speed Mod
GBA Overclocker GBA Overclocker GBA Overclocker GBA Overclocker video

GBA Overclocker

The Game Boy Advance Overclocker Flex by robot_retro replaces the original GBA crystal and gives you full control over your GBA's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock.

  • 6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
  • Largely wire-free flex installation (optional LED wire only)
  • Ultra-low power draw <15 mA
  • Accurate base clock: 4.194 MHz, >0.01 % precise
  • DIY install requires soldering skills – install at your own risk

€29.00 Tax included (17%)

16 in stock
Ships in 1 - 3 Days
Sold items

This item has been sold

4
times

Game Boy Advance Overclocker Flex – Full Control Over Your GBA Clock Speed

Want to speed-breed Pokémon faster, eliminate slowdowns in Castlevania, or just see what a GBA feels like at 170 % clock speed? The Overclocker Flex by robot_retro makes it happen. It replaces the original crystal on the GBA mainboard and gives you access to six different clock speeds at the press of a button – developed in collaboration with RJS FPGA.

Features at a Glance

  • 6 clock speed settings: 30 %, 50 %, 75 % (underclock) and 130 %, 150 %, 170 % (overclock) of the original 4.194 MHz base clock
  • Change speed: Start + Up = faster  |  Start + Right = slower
  • Flex PCB design: No manual wiring required (exception: optional LED indicator wire to test point DL2A)
  • LED feedback (optional): Power LED blinks faster when overclocked, slower when underclocked – base clock = solid green
  • Ultra-low power draw: <15 mA (measured with Nordic Power Profiler Kit II)
  • Highly accurate base clock: 4.194 MHz at >0.01 % accuracy – no difference to the original crystal at stock speeds

Maximum Speed & IPS Compatibility

Depending on your installed display, you may need to limit the maximum speed via solder jumper to avoid screen glitches:

Display Max. Speed Setting
Stock LCD / FunnyPlaying v2 / Hispeedido v2 (non-laminated) 170 % Default (no jumper)
Hispeedido Laminated v5 150 % Bridge solder jumper S1
FunnyPlaying 3.0" Laminated 130 % Bridge solder jumper S2

Installation – What to Expect

The install is comparatively straightforward for an overclocker mod, but not suitable for beginners without soldering experience. You will need at least basic soldering skills and ideally a hot air station to remove the original GBA crystal.

  • Remove the original GBA crystal (hot air station recommended)
  • Place the flex mod and solder 6 points (flux recommended)
  • Optional: Run a wire to test point DL2A for the LED indicator

⚠ Note: This overclocker must be self-installed. We accept no liability for improper installation. If in doubt, please consult an experienced modder.

Strengths & Limitations

  • ✅ No cable clutter thanks to flex PCB design
  • ✅ Identical to the original crystal at stock speeds – zero drawback in everyday use
  • ✅ Compatible with popular IPS mods (with correct speed limiting)
  • ⚠ Not all games handle maximum overclocking – some may run unstably
  • ⚠ Flash carts and reproduction cartridges only work at base clock speed – no overclocking possible
  • ⚠ Installation requires soldering skills and hot air equipment
RR-GBAOC
16 Items
Product Manufacturer
4260416656482
Brand compatibility
Nintendo
WEEE registration number
23582226

Manufacturer
FDC Services Ltd (RobotRetro)
42 Shortheath Crest
GU9 8SB Farnham
United Kingdom
EU responsible person
OpenPandora GmbH
+49 841 1317733
Asternweg 5
Michael Mrozek
85080 Gaimersheim
Germany
chat Comments (0)
GBA Overclocker
€29.00