Best sellers
View all ›
ModRetro Chromatic Mod Kit with tools and buttons
More from
ModRetro Chromatic Mod Kit
Last items in stock
Mod your Chromatic! Change the buttons to your favourite color (plus clear), or change the membrane stiffness. You can even change out your D-Pad post length!
€18.00
Dreamcast USB-C Power Supply
More from
Dreamcast USB-C Replacement Power Supply
In Stock
A replacement power supply for Dreamcast that allows you to use a standard 30W USB-C PD power supply. No need to do any soldering, just switch your old one with this.

Powered from a 15v or 20v Power Delivery USBC charger. Most 30W USB-PD chargers will work fine.
Tested to be between 90 and 95% efficient across all loads. 
Low signal noise and heat.
Drop in solution. No soldering, wires or complicated install required.
No flashing LEDS, perfect for clear shells.
Works perfectly with GDEmu and the RetroGEM.
Works with all Dreamcast models (PAL, Japanese, etc) and removes the risk of accidentally plugging in 240V into a 110V system and causing damage.
Overvoltage, over temperature and fused supply.
Includes 5V and 12V Noctua fan headers
Included 3D Spacer
€59.00
GameCube USB-C Power Supply by robot_retro
More from
GameCube USB-C Power Supply
In Stock
A drop-in USB-C power supply replacement for your GameCube. Extremely reliable, supports all GameCube revisions and upgrades like PicoBoot or PixelFX.
€35.00
Gameboy Original IPS Power Regulator Pro
More from
Gameboy Original IPS Power Regulator Pro (Low Noise)
In Stock
The Game Boy Original IPS Power Regulator Pro (Low Noise) by Robot Retro is a direct solder-in replacement for the stock DMG-01 power supply – purpose-built for IPS screen mods. Note: Does not work with the original Game Boy screen.

~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
€19.00
SNES CleanRGB + EdgeBuster – RGB Mod by RetroSix
More from
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.

Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
GBA FlexAmp with superior audio amp and 2W speaker
More from
GBA FlexAmp including. speakers
Last items in stock
Enhance the audio quality of your GameBoy Advance with this amplifier upgrade kit, which includes a superior audio amplifier and a better 2W speaker.
€19.00

DIY mod kits

This is the section for anyone who prefers to open, solder and rebuild their own hardware. Depending on the system, the kits improve video output, power, displays or other useful features.

Check the exact device and board revision before ordering. Some jobs are beginner-friendly, while others require experience and steady hands; tools and difficulty are listed with each product.

Subcategories

GBA FlexAmp with superior audio amp and 2W speaker
More from
GBA FlexAmp including. speakers
Last items in stock
Enhance the audio quality of your GameBoy Advance with this amplifier upgrade kit, which includes a superior audio amplifier and a better 2W speaker.
€19.00
Gameboy Original IPS Power Regulator Pro
More from
Gameboy Original IPS Power Regulator Pro (Low Noise)
In Stock
The Game Boy Original IPS Power Regulator Pro (Low Noise) by Robot Retro is a direct solder-in replacement for the stock DMG-01 power supply – purpose-built for IPS screen mods. Note: Does not work with the original Game Boy screen.

~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
€19.00
Atari Lynx 1 CleanScreen IPS Kit – RetroSix Display Upgrade
More from
Atari Lynx 1 CleanScreen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (IPS) replaces the dim, power-hungry original screen of your Atari Lynx with a modern IPS display – vibrant colors, high contrast and significantly better battery life. 

Modern IPS display – vivid colors, high contrast, wide viewing angles
Ultra-low power consumption – more playtime per set of batteries
On-Screen Menu with pixel grid, color modes & VGA output
Solder-free for Lynx II, simple soldering required for Lynx I
Compatible with Atari Lynx I only
€79.00
GBA Overclocker Flex – robot_retro | Clock Speed Mod
More from
GBA Overclocker
In Stock
The Game Boy Advance Overclocker Flex by robot_retro replaces the original GBA crystal and gives you full control over your GBA's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock.

6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
€29.00
GameBoy Advance SP replacement conductive pad set
GameBoy Advance SP Conductive Pad Set
In Stock
Replacement conductive pad set for the GameBoy Advance SP – the go-to fix when buttons stop registering properly or feel unresponsive.Designed to fit the GameBoy Advance SP perfectly.Brings sluggish or unresponsive buttons and D-pad back to life.No soldering required – just a small screwdriver and a little patience.
€5.00
2ASIC PCB for McWill FullMod
More from
2ASIC PCB for McWill FullMod
Last items in stock
The 2-ASIC ASIC PCB is intended exclusively for the McWill Game Gear FullMod and must match the mainboard revision of the console.

Correct version for Game Gear 2-ASIC mainboards
Only usable together with the McWill FullMod
The original Game Gear CPU is transferred to this PCB
Requires advanced soldering skills
The 1-ASIC and 2-ASIC versions together cover all Game Gear mainboards
€10.00
1ASIC PCB for McWill FullMod
More from
1ASIC PCB for McWill FullMod
In Stock
The 1-ASIC ASIC PCB is intended exclusively for the McWill Game Gear FullMod and must match the mainboard revision of the console.

Correct version for Game Gear 1-ASIC mainboards
Only usable together with the McWill FullMod
The original Game Gear CPU is transferred to this PCB
Requires advanced soldering skills
The 1-ASIC and 2-ASIC versions together cover all Game Gear mainboards
€10.00