Best sellers
View all ›
ModRetro Chromatic Mod Kit with tools and buttons
More from
ModRetro Chromatic Mod Kit
Last items in stock
Mod your Chromatic! Change the buttons to your favourite color (plus clear), or change the membrane stiffness. You can even change out your D-Pad post length!
€18.00
Dreamcast USB-C Power Supply
More from
Dreamcast USB-C Replacement Power Supply
In Stock
A replacement power supply for Dreamcast that allows you to use a standard 30W USB-C PD power supply. No need to do any soldering, just switch your old one with this.

Powered from a 15v or 20v Power Delivery USBC charger. Most 30W USB-PD chargers will work fine.
Tested to be between 90 and 95% efficient across all loads. 
Low signal noise and heat.
Drop in solution. No soldering, wires or complicated install required.
No flashing LEDS, perfect for clear shells.
Works perfectly with GDEmu and the RetroGEM.
Works with all Dreamcast models (PAL, Japanese, etc) and removes the risk of accidentally plugging in 240V into a 110V system and causing damage.
Overvoltage, over temperature and fused supply.
Includes 5V and 12V Noctua fan headers
Included 3D Spacer
€59.00
GameCube USB-C Power Supply by robot_retro
More from
GameCube USB-C Power Supply
In Stock
A drop-in USB-C power supply replacement for your GameCube. Extremely reliable, supports all GameCube revisions and upgrades like PicoBoot or PixelFX.
€35.00
Gameboy Original IPS Power Regulator Pro
More from
Gameboy Original IPS Power Regulator Pro (Low Noise)
In Stock
The Game Boy Original IPS Power Regulator Pro (Low Noise) by Robot Retro is a direct solder-in replacement for the stock DMG-01 power supply – purpose-built for IPS screen mods. Note: Does not work with the original Game Boy screen.

~85% efficiency between 3.5V and 8V (with IPS screen + flash cart)
Noticeably reduced speaker hum thanks to high-quality aluminium capacitors
Low voltage cutoff protects your system from instability
Compatible with Game Boy DMG-01 (Original) only
€19.00
3D Printed xStation Cover
xStation Cover (3D Printed)
In Stock
A 3D printed cover that makes the xStation installation a lot more beautiful. No SD Card extender or similar is needed, this design direclty uses the SD Card slot of the xStation.
€32.00
View details
SNES CleanRGB + EdgeBuster – RGB Mod by RetroSix
More from
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.

Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
GBA FlexAmp with superior audio amp and 2W speaker
More from
GBA FlexAmp including. speakers
Last items in stock
Enhance the audio quality of your GameBoy Advance with this amplifier upgrade kit, which includes a superior audio amplifier and a better 2W speaker.
€19.00

DIY mod kits

This is the section for anyone who prefers to open, solder and rebuild their own hardware. Depending on the system, the kits improve video output, power, displays or other useful features.

Check the exact device and board revision before ordering. Some jobs are beginner-friendly, while others require experience and steady hands; tools and difficulty are listed with each product.

Subcategories

RetroSix CleanJuice AA USB-C Pack – Sega Game Gear
More from
Out-of-Stock
CleanJuice AA USB-C Pack (Game Gear)
Out-of-Stock
The RetroSix CleanJuice AA USB-C Pack replaces your Sega Game Gear's notorious original power board with a modern USB-C charging power board – drop-in, no soldering, no cutting required.

Works 6× standard NiMH AA batteries (not included)
Drop-in install – no soldering, no cutting
USB-C charging directly on the console – replaces the original DC jack
Ultra-low ripple, over/under voltage protection, thermal shutdown
Compatible with CleanScreen V4, CleanAmp and other mods
€29.99
RetroSix CleanScreen GBA – IPS Screen Kit for Game Boy Advance
More from
Game Boy Advance CleanScreen Screen Kit (IPS)
In Stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.

Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00
Game Gear CleanScreen Kit V4 – RetroSix IPS Upgrade
More from
Out-of-Stock
Game Gear CleanScreen Kit V4
Out-of-Stock
The RetroSix Game Gear CleanScreen Kit V4 is the most advanced IPS display upgrade ever made for the Sega Game Gear – compatible with all mainboard revisions VA0 to VA5, wire-free to install, and packed with features that even hardcore modders will love.

Universal compatibility: VA0, VA1, VA2, VA4 & VA5
640×480 HD IPS display – sharp colours, high contrast
Wire-free installation via pre-made ribbon cables
Triple frame buffer – no tearing, no stuttering
Infinity Scaling & pixel-perfect mode
Upgradeable from Core to Pro/Ultra via CleanScreen App
€75.00
SNES CleanRGB + EdgeBuster – RGB Mod by RetroSix
More from
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.

Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€23.00
RetroSix CleanRGB Universal – RGB Mod for Retro Consoles
More from
CleanRGB Universal
In Stock
The RetroSix CleanRGB Universal is a fully active DC RGB mod board that cleans up your retro console's video signal at the source – no capacitors, no AC coupling, no more band-aid «smart cables».

Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
€29.00
SNES EdgeBuster – Fix RGB Ghosting | RetroSix
More from
SNES Edgebuster
In Stock
Say goodbye to the classic SNES ghosting issue! The RetroSix SNES EdgeBuster is a compact mod board that eliminates the well-known left-to-right smearing and edge blur from your Super Nintendo's RGB and composite video output – without any loss of color or detail.

Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
€15.00
GBA SP Screen Kit (IPS)
More from
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.

Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
GBA SP Overclocker Flex – robot_retro | 6 Speed Levels
More from
GBA SP Overclocker Flex Mod
In Stock
The Game Boy Advance SP Overclocker Flex by robot_retro replaces the original GBA SP crystal and puts you in full control of your console's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. Flex PCB design, minimal wiring, developed in collaboration with RJS FPGA.

6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
€29.00
Game Boy Color Overclocker Flex – robot_retro Speed Mod
More from
GBC Overclocker Flex Mod
In Stock
The Game Boy Color Overclocker Flex by robot_retro replaces the original GBC crystal and puts you in full control of your Game Boy Color's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. The flex PCB design eliminates almost all manual wiring.

6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
€29.00
RetroSix CleanAmp Duo – Stereo Amp for Game Gear
More from
New
Game Gear CleanAmp Duo (Stereo & Mono Audio Amplifier)
In Stock
The RetroSix CleanAmp Duo is the ultimate audio upgrade for your Sega Game Gear – delivering massive volume, true stereo sound and a fully restored tonal range the original hardware never offered.

Over 200% louder than the original speaker
Stereo & Mono flexibly selectable via solder bridge
Nearly wire-free drop-in installation
Includes board, 2x speakers, mount bracket & extension wire
€29.00
Game Gear RePCB Motherboard 2-ASIC – RetroSix VA0
More from
New
Game Gear RePCB New Motherboard (2-ASIC)
In Stock
The Game Gear RePCB (2-ASIC) by RetroSix is a completely redesigned motherboard for the Sega Game Gear VA0 – the ideal foundation for a clean, high-quality console rebuild.

For VA0 consoles with 2-ASIC configuration (IC2 315-5377 & IC3 315-5378)
Designed for the RetroSix CleanScreen – not compatible with the original LCD
Self-powered via USB-C: test without power or audio boards
Japan/English toggle switch & reset button directly on the board
Includes CleanScreen ribbons, power/audio ribbons, solder paste, stencil & spreader
€59.00
Game Gear RePCB 1-ASIC – New Motherboard by RetroSix
More from
New
Game Gear RePCB New Motherboard (1-ASIC)
In Stock
The RetroSix Game Gear RePCB (1-ASIC) is a complete ground-up redesign of the original Game Gear motherboard for all VA1/2/4/5 variants – loaded with modern improvements to audio, stability, and ease of use.

Compatible with VA1 / VA2 / VA4 / VA5 (all 1-ASIC variants)
Onboard USB-C for testing without a power or audio board
Japan/English toggle & 50/60 Hz switch
Improved audio via new amp and filter circuit design
Includes CleanScreen ribbons for solder-free installation
€59.00