Home
- Consoles & handheldsaddremove
- PC handhelds & UMPCsaddremove
- Products foraddremove
- Gamesaddremove
- Repairs, mods & spare partsaddremove
- Accessoriesaddremove
- Merchandise, Magazines and Booksaddremove
- Checkmate & Retro Monitoraddremove
- Homebrew production & developer suppliesaddremove
- Oddment
- Coming soon
News from the shop
Subscribe to our Newsletter
Repairs, mods & spare parts
Old hardware is often remarkably robust, but not immortal. This section contains replacement parts, mod kits and repair or installation services for consoles, handhelds and home computers.
Browse replacement parts, DIY kits, services with or without included parts and dedicated PixelFX, RetroSix and RobotRetro sections. Always check the revision, contents and required work.
Subcategories
There are 158 products.
GPD Duo Replacement Battery
In Stock
Original replacement battery (model 6548A0) for the GPD Duo – sourced directly from the OEM manufacturer, not a cheap knockoff. Important: The 6548A0 designation also exists for the GPD Win 5, but the two batteries are physically incompatible – only install this one in a GPD Duo.Fits the GPD Duo perfectly and communicates correctly with the device's charge controller.Supports fast charging at up to 100 W (PD 3.0) – just like the original factory battery.At 80 Wh capacity, you'll get your GPD Duo back to full endurance.Warning: Not compatible with the GPD Win 5, despite sharing the same 6548A0 model number.
€89.00
GBA Overclocker
In Stock
The Game Boy Advance Overclocker Flex by robot_retro replaces the original GBA crystal and gives you full control over your GBA's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Largely wire-free flex installation (optional LED wire only)
Ultra-low power draw <15 mA
Accurate base clock: 4.194 MHz, >0.01 % precise
DIY install requires soldering skills – install at your own risk
€29.00
1ASIC PCB for McWill FullMod
In Stock
The 1-ASIC ASIC PCB is intended exclusively for the McWill Game Gear FullMod and must match the mainboard revision of the console.
Correct version for Game Gear 1-ASIC mainboards
Only usable together with the McWill FullMod
The original Game Gear CPU is transferred to this PCB
Requires advanced soldering skills
The 1-ASIC and 2-ASIC versions together cover all Game Gear mainboards
Correct version for Game Gear 1-ASIC mainboards
Only usable together with the McWill FullMod
The original Game Gear CPU is transferred to this PCB
Requires advanced soldering skills
The 1-ASIC and 2-ASIC versions together cover all Game Gear mainboards
€10.00
Atari Lynx Cleanpower + USB-C-Port
In Stock
Replace the power circuit of your Atari Lynx I or II and add a standard USB Port as power supply! You can optionally install LiPo Batteries as further upgrade.
€25.00
CleanJuice AA USB-C Pack (Game Gear)
In Stock
The RetroSix CleanJuice AA USB-C Pack replaces your Sega Game Gear's notorious original power board with a modern USB-C charging power board – drop-in, no soldering, no cutting required.
Works 6× standard NiMH AA batteries (not included)
Drop-in install – no soldering, no cutting
USB-C charging directly on the console – replaces the original DC jack
Ultra-low ripple, over/under voltage protection, thermal shutdown
Compatible with CleanScreen V4, CleanAmp and other mods
Works 6× standard NiMH AA batteries (not included)
Drop-in install – no soldering, no cutting
USB-C charging directly on the console – replaces the original DC jack
Ultra-low ripple, over/under voltage protection, thermal shutdown
Compatible with CleanScreen V4, CleanAmp and other mods
€29.99
Game Boy Advance CleanScreen Screen Kit (IPS)
In Stock
The RetroSix CleanScreen IPS Kit is the best display upgrade available for your Game Boy Advance – modern IPS panel, true-to-original colors, and zero compromises on retro feel.
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
Drop-in solution: no cutting or trimming of OEM shells required
Identical pixel size to the original display
True Color mode: color calibration matching the AGS-101 standard
Zero ghosting, tearing or flickering
Ultra-low power draw: lowest of all IPS kits on the market
€75.00
Game Gear CleanScreen Kit V4
In Stock
The RetroSix Game Gear CleanScreen Kit V4 is the most advanced IPS display upgrade ever made for the Sega Game Gear – compatible with all mainboard revisions VA0 to VA5, wire-free to install, and packed with features that even hardcore modders will love.
Universal compatibility: VA0, VA1, VA2, VA4 & VA5
640×480 HD IPS display – sharp colours, high contrast
Wire-free installation via pre-made ribbon cables
Triple frame buffer – no tearing, no stuttering
Infinity Scaling & pixel-perfect mode
Upgradeable from Core to Pro/Ultra via CleanScreen App
Universal compatibility: VA0, VA1, VA2, VA4 & VA5
640×480 HD IPS display – sharp colours, high contrast
Wire-free installation via pre-made ribbon cables
Triple frame buffer – no tearing, no stuttering
Infinity Scaling & pixel-perfect mode
Upgradeable from Core to Pro/Ultra via CleanScreen App
€75.00
Game Gear Shell Kit (Master System Clear Black)
In Stock
The RetroSix Prestige Shell Kit for the Sega Game Gear in Master System Clear Black – a premium ABS full replacement shell kit featuring an iconic Sega Master System-inspired design in a sleek transparent black finish.
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
Material: High-quality ABS plastic (from Japan), better fit and finish than the original
Design: Master System Clear Black – UV-printed Master System styling on transparent black ABS
Includes: Front & back shell, battery covers, port covers, metal springs, metal cartridge guard, screws
Compatible with original LCD and IPS displays (pre-prepared)
€25.00
SNES SFC CleanRGB + EdgeBuster
In Stock
The RetroSix CleanRGB + EdgeBuster is the professional solution for crystal-clear RGB video from your SNES or SFC. No more DC offset, artifacts, or blurry pixel edges – this mod board fixes the problems at the source.
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
Unique DC active circuit – no AC coupling, no capacitor hacks
EdgeBuster feature for 2-chip SNES/SFC: sharper pixel edges, no more ghosting
Pre-configured & tested for all SNES/SFC variants
€19.00
CleanRGB Universal
In Stock
The RetroSix CleanRGB Universal is a fully active DC RGB mod board that cleans up your retro console's video signal at the source – no capacitors, no AC coupling, no more band-aid «smart cables».
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
Fully active DC circuit – no AC coupling, no capacitors in the signal path
Universal compatible: SNES, Mega Drive, Master System, Neo Geo AES and more
Eliminates noise, field tilt, droop and ghosting artefacts
Adjustable gain & IRE levels per RGB channel
75-ohm impedance matching to specification
€29.00
SNES Edgebuster
In Stock
Say goodbye to the classic SNES ghosting issue! The RetroSix SNES EdgeBuster is a compact mod board that eliminates the well-known left-to-right smearing and edge blur from your Super Nintendo's RGB and composite video output – without any loss of color or detail.
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
Fixes ghosting and blurry edges in RGB and Composite signals
No color distortion or detail loss
Supports up to 4 video signal pins (RGB + Composite)
Solder installation required (GND, VCC + 1 wire per pin)
€19.00
GBA SP Screen Kit (IPS)
In Stock
The RetroSix CleanScreen Kit (Laminated IPS) for the Game Boy Advance SP is the most refined display upgrade for Nintendo's iconic clamshell handheld – zero ghosting, zero tearing, zero flickering, with vivid colours and true-to-original image reproduction.
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
Fully laminated IPS display – no dust or smudges between glass and panel
Identical pixel size to the original GBA SP screen
OSD menu with brightness, colour modes, scanlines, pixel grid & True Motion
Ultra-low-power driver board – lowest power draw of any IPS kit on the market
No soldering required for the basic installation
€95.00
GBA SP Overclocker Flex Mod
In Stock
The Game Boy Advance SP Overclocker Flex by robot_retro replaces the original GBA SP crystal and puts you in full control of your console's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. Flex PCB design, minimal wiring, developed in collaboration with RJS FPGA.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Control via Select + R (faster) / Select + L (slower)
Ultra-accurate base clock: 4.194 MHz ±0.01 % – indistinguishable from stock at base speed
Optional LED indicator (power LED blinks faster/slower depending on clock speed)
Ultra-low power draw (<15 mA)
Multicoloured wire included
€29.00
GBC Overclocker Flex Mod
In Stock
The Game Boy Color Overclocker Flex by robot_retro replaces the original GBC crystal and puts you in full control of your Game Boy Color's clock speed – from a relaxed 30 % all the way up to 170 % of the base clock. The flex PCB design eliminates almost all manual wiring.
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
6 speed settings: 30 %, 50 %, 75 %, 130 %, 150 %, 170 % of base clock
Button-combo control: Select + Up = faster, Select + Down = slower
Flex PCB design – no manual wiring required
Max speed configurable via solder jumper (170 % / 150 % / 130 %)
Works with flash carts; not compatible with OLED screens
€29.00
GD Emu (ODE for Sega Dreamcast)
Out-of-Stock
The GDEMU is an optical drive emulator (ODE) that replaces your Sega Dreamcast's aging GD-ROM drive with a modern SD card solution.
Load games directly from SD card - no more disc swapping
100% compatibility with your entire Dreamcast library
No BIOS modifications or technical expertise required
Dramatically faster loading times than original hardware
Eliminates mechanical failure - a permanent solution for your console
Full CD Digital Audio support for authentic gameplay
Load games directly from SD card - no more disc swapping
100% compatibility with your entire Dreamcast library
No BIOS modifications or technical expertise required
Dramatically faster loading times than original hardware
Eliminates mechanical failure - a permanent solution for your console
Full CD Digital Audio support for authentic gameplay
€119.00
PixelFX Retro G.E.M. N64 Adapter Kit
Out-of-Stock
This adapter kit includes all console-specific parts required to install a PixelFX Retro G.E.M. in a Nintendo 64.Includes the required cables, adapters and console-specific installation partsPixelFX Retro G.E.M. itself is required separatelyCompatible with all Nintendo 64 board revisionsCannot be used as a stand-alone product
€29.00
PixelFX Retro G.E.M. PS2 Fat Adapter Kit
Out-of-Stock
This adapter kit includes all console-specific parts required to install a PixelFX Retro G.E.M. in a PlayStation 2 Fat.Includes the required cables, adapters and console-specific installation partsPixelFX Retro G.E.M. itself is required separatelyCompatible with GH-015 and later mainboardsCannot be used as a stand-alone product
€29.00
SEGA MegaDrive 1 CleanPower
Out-of-Stock
Use a standard USB-PD power supply to power your original Sega Mega Drive. The installation requires soldering skills.
€19.00
Lynx Capacitor / Power Circuit Replacement (Polymer / Ceramic) (Kit is included)
Out-of-Stock
Give your Atari Lynx a fresh lease on life with a professional capacitor replacement service — all caps included in the price!Fixes common issues like unstable operation, display problems, and sound glitches caused by aging or failing capacitorsUses high-quality polymer and ceramic capacitors for long-lasting, reliable performanceFull power circuit recapping to prevent further damage to your Lynx's electronicsComplete kit is included — no need to source parts yourselfPerformed by experienced retro hardware specialists at DragonBox ShopCan be combined with McWill's LCD Mod for a full Lynx restoration package
€65.00
GPH WIZ Full case set
Out-of-Stock
Give your GPH WIZ a brand new look with this complete original replacement case set — everything you need for a full shell swap or creative mod project!Brand new original full case set made specifically for the GPH WIZ handheld consoleIncludes all plastic parts for a complete exterior restorationComes with all buttons included in the setIncludes keymats for both the D-Pad and action buttonsPerfect for bringing a worn or damaged WIZ back to like-new conditionGreat starting point for custom modding and personalisation projects
€3.00
€39.00
Game Gear CleanScreen Kit v3.1 (IPS-Display)
Out-of-Stock
Upgrade your GameGear with a beautiful IPS Screen which doesn't only look a lot better but increases the battery time to up to 15 hours!
€89.00
GameGear Capacitor Kit
Out-of-Stock
Give your Sega Game Gear a new lease on life with this high-quality capacitor replacement kit from DragonBox!Includes all electrolytic capacitors needed for the Game Gear, covering both the Power Board and Audio BoardFixes common issues like unstable performance, display problems, and distorted or missing audioHigh-end capacitor quality for long-lasting, reliable resultsExtends the lifetime of your Game Gear by many yearsRequires soldering — perfect for DIY repair enthusiasts with basic electronics skills
€12.00
€129.00
Lynx 1+2 Polymer/Ceramic Capacitor and Voltage Regulator Kit
Out-of-Stock
Give your Atari Lynx 1 or 2 a new lease on life with this premium polymer/ceramic capacitor and voltage regulator replacement kit.Complete kit with all high-end polymer and ceramic capacitors plus voltage regulator for the Lynx 1 and Lynx 2Fixes common issues like unstable performance, display problems, and audio glitches caused by aging capacitorsIncludes everything needed for the proven "5V Voltage Regulator Mod" to protect your consolePrevents further damage caused by the faulty original voltage regulator workaroundHigh-quality components for a lasting, reliable repairSoldering required – ideal for confident DIY retro hardware enthusiasts
€20.00
GameGear Capacitor Replacement (Kit is included)
Out-of-Stock
Give your Sega Game Gear a new lease on life with our professional capacitor replacement service — all caps included!Full recap service performed by our experienced technicians — no soldering skills needed on your endAll replacement capacitors are included in the price, no hidden extrasFixes common issues like unstable performance, distorted sound, and display problemsPrevents further damage to your Game Gear's electronics down the lineCan be combined with the McWill LCD Mod for a complete restorationPerfect for bringing your childhood Game Gear back to its former glory
€45.00
DriveRDY (PC-Floppy to Amiga Adapter)
Out-of-Stock
Using this adapter you can use a standard PC 3.5" Floppy drive with your Amiga.
€25.00
Vectrex Capacitor Kit
Out-of-Stock
Give your Vectrex a new lease on life with this complete capacitor replacement kit from DragonBox Shop!Includes all electrolytic capacitors needed to fully recap your Vectrex consolePerfect fix for common issues like unstable picture, distorted audio, or a completely dead unitOld and failing capacitors are one of the most frequent causes of Vectrex problems — this kit tackles them allHigh-quality replacement components to extend your Vectrex's lifespan by many yearsIdeal for retro gaming enthusiasts who enjoy DIY electronics repairsNote: soldering skills required — please ensure proper installation to avoid damage
€22.00
GPD Win 3/4 - Replacement Battery
Out-of-Stock
Original replacement battery from GPD for the GPD Win 3 and GPD Win 4 – part number 555779 / AEC555779-3S1P / 565774-3S. Restore your handheld's full battery life without relying on third-party quality.
Compatible with GPD Win 3 & Win 4
Original part from the manufacturer (GPD)
Part number: 555779 / AEC555779-3S1P / 565774-3S
Li-Ion Polymer, 3 cells, approx. 11.55 V / ~45 Wh
Note: Installation requires opening the device – see disclaimer
Compatible with GPD Win 3 & Win 4
Original part from the manufacturer (GPD)
Part number: 555779 / AEC555779-3S1P / 565774-3S
Li-Ion Polymer, 3 cells, approx. 11.55 V / ~45 Wh
Note: Installation requires opening the device – see disclaimer
€65.00
Amiga CD32 Capacitor Replacement (Kit is included)
Out-of-Stock
Give your Amiga CD32 a new lease on life with our professional capacitor replacement service — all caps included!Full recap service for your Commodore Amiga CD32 performed by experienced retro hardware techniciansAll replacement capacitors are included in the price — no hidden extrasFixes common issues like unstable operation, distorted audio, or display problems caused by aging capsPrevents further damage to your board from leaking or failing electrolytic capacitorsJust send us your unit and we'll take care of the rest — fast and reliable turnaroundIdeal for preserving and extending the life of your beloved Amiga CD32
€75.00